• Publications
  • Influence
Processing of single polymer composites using the concept of constrained fibers
The concept of “overheating” is one of the known methods for manufacturing single polymer composites. This concept is validated on two categories of semi-crystalline polymers: the drawable, apolarExpand
  • 101
  • 4
  • PDF
Morphological investigations of polypropylene single-fibre reinforced polypropylene model composites
Melt-spun isotactic polypropylene (iPP) fibres have been prepared with moduli of about 12 GPa and strength of 730 MPa. Single-fibre model composites are prepared by embedding constrained high-modulusExpand
  • 127
  • 1
High-performance polypropylene structures for eco-friendly, fully recyclable composites
• A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version ofExpand
  • 16
  • 1
  • PDF
Influence of postdrawing temperature on mechanical properties of melt-spun isotactic polypropylene
Mechanical properties of melt-spun and postdrawn isotactic polypropylene (iPP) are studied to examine the dependence on the temperature in the postdrawing stage. In accordance with the literature,Expand
  • 28
  • 1
Effect of postdrawing temperature on structure, morphology and mechanical properties of melt-spun isotactic polypropylene tapes
Structure, morphology, and mechanical properties of melt-spun and postdrawn isotactic polypropylene (iPP) tapes are analyzed to study the effect of postdraw temperature applied. For affine drawingExpand
  • 14
On the overdrawing of melt-spun isotactic polypropylene tapes
The morphology and mechanical properties of melt-spun and post-drawn isotactic polypropylene (iPP) tapes have been studied in order to examine their dependence on the post-draw ratio applied. SpecialExpand
  • 26
Morphology-mechanical property relations in syndiotactic polypropylene (sPP) fibers
Mechanical properties of melt-spun syndiotactic polypropylene single filament fibers were studied in relation to their formation conditions. Depending on the processing parameters, fibers withExpand
  • 20
Strukturbauteile mit dekorativer Oberfläche
Ein Verfahren zur Herstellung von Strukturbauteilen mit dekorativer Oberflache durch Umformen eines flachigen Halbzeugs aus Polypropylen oder einem Polyamid, welches lange Verstarkungsfasern enthalt,Expand
Eigenverstärkte Polypropylen-Verbundwerkstoffe - Reinforced Polypropylene Composite Materials
Polyethylen und (isotaktisches) Polypropylen werden schon seit langer Zeit in der Orthopadietechnik eingesetzt. Die Grunde dafur sind u. a. ihre einfache Verarbeitbarkeit – sie sind thermoformbar –,Expand