• Publications
  • Influence
Linearly Polarized Modes of a Corrugated Metallic Waveguide
A linearly polarized (LPmn) mode basis set for oversized, corrugated, metallic waveguides is derived for the special case of quarter-wavelength-depth circumferential corrugations. The relationshipExpand
High-Power Microwave Radiation as an Alternative Insect Control Method for Stored Products
Insect mortality studies were performed with a high-power microwave source operating at a frequency of 10.6 GHz at power levels of 9–20 kW to irradiate samples of soft white wheat, Triticum aestivumExpand
Overview of results from the National Spherical Torus Experiment (NSTX)
The mission of the National Spherical Torus Experiment (NSTX) is the demonstration of the physics basis required to extrapolate to the next steps for the spherical torus (ST), such as a plasma facingExpand
Integration of a Dose Control Circuit with a Vertically Aligned NanoFiber Field Emission Device
This paper discusses the complete integration of the prototype digital electrostatic focused e-beam array direct-write lithography (DEAL) device with the dose control circuitry (DCC). The DCCExpand
Overview of the Initial NSTX Experimental Results
The main aim of the National Spherical Torus Experiment (NSTX) is to establish the fusion physics principles of the spherical torus (ST) concept. The NSTX device began plasma operations in FebruaryExpand
Overview of physics results from MAST
Major developments on the Mega Amp Spherical Tokamak (MAST) have enabled important advances in support of ITER and the physics basis of a spherical tokamak (ST) based component test facility (CTF),Expand
THREE DIMENSIONAL MODELLING OF ICRF LAUNCHERS FOR FUSION DEVICES
The three dimensional (3-D) nature of antennas for fusion applications in the ion cyclotron range of frequencies (ICRF) requires accurate modelling to design and analyse new antennas. In thisExpand
Overview of the ITER EC H&CD system and its capabilities
The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject >= 20 MW RF power into the plasma for Heating and Current Drive (HC) applications. The EC system consists of up to 26Expand
Loss Estimate for ITER ECH Transmission Line Including Multimode Propagation
Abstract The ITER electron cyclotron heating (ECH) transmission lines (TLs) are 63.5-mm-diam corrugated waveguides that will each carry 1 MW of power at 170 GHz. The TL is defined here as theExpand
The Development of the Material Plasma Exposure Experiment
The availability of future fusion devices, such as a fusion nuclear science facility or demonstration fusion power station, greatly depends on long operating lifetimes of plasma facing components inExpand
...
1
2
3
4
5
...