- Full text PDF available (1)
- This year (0)
- Last 5 years (0)
- Last 10 years (5)
Journals and Conferences
In this paper, a new desktop NC machine tool with compliance controllability is presented for finishing metallic molds with small curved surface. The NC machine tool consists of three single-axis robots with high position resolution. A tool attached to the tip of the z-axis has a small ball-end shape. Also, the control system of the NC machine tool is… (More)
High power pulsed submillimeter wave sintering of zirconia ceramics was performed. The relationship between the relative dencity of a sintered sample and the duty ratio of submillimeter wave irradiation was obtained.
In the field of whole slide imaging, the imaging device or staining process cause color variations for each slide that affect the result of image analysis made by pathologist. In order to stabilize the analysis, we developed a color standardization method and system as described below. (1) Color standardization method based on RGB imaging and multi spectral… (More)
Electromagnetic wave heating has drawn much attention in material processing. This method is possible in using materials with the dielectric loss in the corresponding wavelength region. The merits are quick response and uniformity of heating due to inner exothermic reaction . These features suggest the possibility that electromagnetic wave heating… (More)
The sub-millimeter (300 GHz) wave sintering of the alumina ceramics had been performed. The sub-millimeter wave sintering curve shows the sintering slower at the same temperature, for sub-millimeter wave processing as compared to millimeter wave processing.