Numerical study to predict optimal configuration of fin and tube compact heat exchanger with various tube shapes and spatial arrangements
- M. Zeeshan, S. Nath, Dipankar Bhanja
- Engineering
- 15 September 2017
Analytical solution to predict performance and optimum design parameters of a constructal T-shaped fin with simultaneous heat and mass transfer
- Saheera Azmi Hazarika, Dipankar Bhanja, S. Nath, B. Kundu
- Engineering
- 1 May 2015
Numerical simulations of Newtonian fluid flow through a suddenly contracted rectangular channel with two different types of baffle plates
- S. Saha, P. Biswas, S. Nath, L. Singh
- Materials ScienceSoft Computing - A Fusion of Foundations…
- 25 September 2020
The aim of this study is to investigate the dynamic behavior of turbulent air flow, baffle height, baffles thickness and arrangement of baffle in different locations for high values of Re, and to reveal that increase of Reynolds number causes the increase in vortexes.
Application of metaheuristic algorithms in optimum thermal design analysis of a rectangular porous fin subjected to both insulated and convective tip conditions
- T. Deshamukhya, Dipankar Bhanja, S. Nath
- Physics
- 13 January 2020
In this novel optimization analysis, a rectangular porous fin subjected to convective tip conditions along with insulated end condition is studied. The aim is to optimize the important variables…
Numerical investigation for the optimal placements of rectangular vortex generators for improved thermal performance of fin-and-tube heat exchangers
- M. Zeeshan, S. Nath, Dipankar Bhanja, Aabir Das
- Engineering, Physics
- 25 May 2018
Unveiling the melting phenomena of PCM in a latent heat thermal storage subjected to temperature fluctuating heat source
- B. R. Tamuli, S. Nath, Dipankar Bhanja
- Engineering, Physics
- 1 June 2021
Thermal analysis of a constructal T-shaped porous fin with simultaneous heat and mass transfer
- Saheera Azmi Hazarika, T. Deshamukhya, Dipankar Bhanja, S. Nath
- Engineering
- 1 September 2017
Effect of nanofluid on thermo hydraulic performance of double layer tapered microchannel heat sink used for electronic chip cooling
- Avinash Kumar, S. Nath, Dipankar Bhanja
- Engineering, Physics
- 29 March 2018
ABSTRACT Thermo-hydraulic performance analysis of a tapered double layer microchannel heat sink (DL-MCHS) is done numerically. Water and Al2O3–H2O nanofluid coolants are used with uniform heat flux…
Geometric optimization and performance study of a constructal T-shaped fin under simultaneous heat and mass transfer
- Saheera Azmi Hazarika, Dipankar Bhanja, S. Nath, B. Kundu
- Physics, Engineering
- 25 October 2016
Thermal design parameters of a wet T-shaped fin for linear variation of humidity ratio with saturation temperature
- Saheera Azmi Hazarika, Dipankar Bhanja, S. Nath, B. Kundu
- Engineering
- 15 May 2018
An analytical model based on homotopy perturbation method is developed to analyze the thermal performance and optimum geometric dimensions of a T-shaped fin under fully wet condition by adopting a…
...
...