- Full text PDF available (1)
- This year (1)
- Last 5 years (4)
- Last 10 years (5)
Journals and Conferences
Two designs of integrated magnetic planar transformer called Face to Face transformer are studied: The first one consists in depositing the copper windings on the magnetic material, the second consists in micromachining the magnetic layer before depositing the conductive layer in order to bury copper windings inside the magnetic material.
Article history: Received 8 December 2016 Received in revised form 28 March 2017 Accepted 29 March 2017 Available online 3 April 2017 This article is devoted to the inductance and resistance evolution of a coreless inductor depending on temperature. The inductors are fabricated of thin copper films deposited on an alumina substrate and characterized up to… (More)
In this article a new method to characterize magnetic components is presented. This method is based on the φ(i) loop measurement for any running conditions. This method is suitable for planar magnetic components and does not need any modification of the component.
In this work the forward J–V characteristics of 4H–SiC<lb>p–i–n diodes are analyzed by means of a physics based<lb>device simulator tuned by comparison to experimental<lb>results. The circular devices have a diameter of 350 mm.<lb>The implanted anode region showed a plateau alumi-<lb>num concentration of 6 × 1019 cm-3 located at the surface<lb>with a profi… (More)