• Publications
  • Influence
Suspension HVOF Spraying of Reduced Temperature Solid Oxide Fuel Cell Electrolytes
Metal-supported solid oxide fuel cells (SOFCs) composed of a Ce0.8Sm0.2O2−δ (SDC) electrolyte layer and Ni-Ce0.8Sm0.2O2−δ (Ni-SDC) cermet anode were fabricated by suspension thermal spraying onExpand
Electrochemical supercapacitors for energy storage and delivery: Advanced materials, technologies and applications☆
Electrochemical supercapacitors for energy storage and delivery : Advanced materials, technologies and applications
Metal-supported solid oxide fuel cell operated at 400–600 °C
Abstract A metal-supported SOFC with a samarium doped ceria (SDC)/scandia-stabilized zirconia (ScSZ) bilayer electrolyte was fabricated by a combination of pulsed laser deposition (PLD) and wetExpand
Thermal behavior of silver nanoparticles for low-temperature interconnect applications
Low-temperature sintering behavior of Ag nanoparticles was investigated. The nano Ag particles used (∼20 nm) exhibited obvious sintering behavior at significantly lower temperatures (∼150°C) than theExpand
Ammonia gas sensors: A comprehensive review.
In recent years, sensitive, selective and accurate sensing techniques for ammonia gas detection have been highly demanded since ammonia is both a commonly utilized gas in various industrial sectorsExpand
Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges
In this article, the applications, potential advantages, and challenges of thermal plasma spray (PS) processing for nanopowder production and cell fabrication of solid oxide fuel cells (SOFCs) areExpand
Sm0.5Sr0.5CoO3 + Sm0.2Ce0.8O1.9 composite cathode for cermet supported thin Sm0.2Ce0.8O1.9 electrolyte SOFC operating below 600 °C
Abstract The cathode is a key component in low temperature solid oxide fuel cells. In this study, composite cathode, 75 wt.% Sm0.5Sr0.5CoO3 (SSC) + 25 wt.% Sm0.2Ce0.8O1.9 (SDC), was applied on theExpand
Interface reactions in the NiO–SDC–LSGM system
Abstract The reactivity of NiO–SDC (samaria-doped ceria) anode material with a Sr- and Mg-doped lanthanum gallate (LSGM) electrolyte was studied by X-ray diffraction (XRD) and electricalExpand
Solid Oxide Fuel Cells with Doped Lanthanum Gallate Electrolyte and LaSrCoO3 Cathode, and Ni‐Samaria‐Doped Ceria Cermet Anode
The electrode performance of a single solid-oxide fuel cell (SOFC) was evaluated using a 500 {micro}m thick La{sub 0.9}Sr{sub 0.1}Ga{sub 0.8}O{sub 0.3} (LSGM) as the electrolyte membrane. A dopedExpand
A brief review of the ionic conductivity enhancement for selected oxide electrolytes
The advantages of lowering the operation temperature of SOFCs have attracted great interest worldwide. One of the major barriers to decreasing the operation temperature is the ohmic loss of theExpand