• Publications
  • Influence
Neutron Detection Time Distributions of Multisphere LiI Detectors and AB REM Meter at A 20-MeV Electron Linac
Neutron detection time distribution is an important factor for the dead-time correction for moderator type neutron detectors used in pulsed radiation fields. Measurements of the neutron detectionExpand
  • 10
  • 1
  • PDF
Performance enhancement of pulsed solid state power amplifier using Drain Modulation over Gate Modulation
TLDR
The study was conducted to compare the RF parameters of Pulsed Solid State Power Amplifier using Drain modulation and Gate Modulation and thereby to analyze the impact of modulations on the pulsed performance. Expand
  • 9
  • 1
Nonlinear Design of a C band Power Amplifier using EEHEMT Nonlinear Model
TLDR
This paper illustrates the nonlinear design of a single stage C band power amplifier. Expand
  • 8
Design and comparison of MHEMT and diode based K-band sub-harmonically pumped mixer MMICs
This paper presents the design, simulation and measured results of two types of K-band monolithic sub-harmonically pumped (SHP) mixers. The mixers are designed using 0.13um metamorphic high electronExpand
  • 4
Enclosure Effect on Microwave Power Amplifier
The package design for microwave sub-systems requires adequate knowledge of electromagnetic field distribution inside the package housing. The cavity resonance of the microwave amplifier not onlyExpand
  • 8
Nonlinear model based Power Amplifier
This paper illustrates the nonlinear design and realization of MESFET nonlinear model based Power Amplifier to deliver minimum 12watt output power with 37% efficiency at operating Vds of 9V. CriticalExpand
  • 3
C-BAND PULSED SOLID STATE POWER AMPLIFIER FOR SPACEBORNE APPLICATIONS
The basic applications of pulsed solid state power amplifler are for airborne and spaceborne pulsed Radar and these applications have always demanded well performance over difierent environmentalExpand
  • 2
  • PDF
Spaceborne C-band Pulsed Solid State Power Amplifier
This paper describes the design and development of a C-band Pulsed SSPA to deliver 12-watt output power with 45 dB gain. Salient features of this design are the use of drain biasing technique forExpand
  • 2
DESIGN AND SIMULATION OF MULTIBEAM KLYSTRON CAVITY
The design and simulation of a multibeam re-entrant type cavity with four beams is presented for a 350 MHz, 250 kW CW klystron. The simulation is carried out using electromagnetic code CST MicrowaveExpand
  • 2
The calculations and the measurements of neutron moderation time for neutron detectors at SLAC
The purpose of this paper is to report the calculations and the measurements of neutron moderation time for common neutron detectors in pulsed radiation field at SLAC. The detectors used for thisExpand
...
1
2
...