Share This Author
Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique—A comparative analysis
PARAMETRIC OPTIMIZATION OF POWDER MIXED ELECTRICAL DISCHARGE MACHINING BY RESPONSE SURFACE METHODOLOGY
Effect of Silicon Powder Mixed EDM on Machining Rate of AISI D2 Die Steel
Treatment of phenol and cresols in upflow anaerobic sludge blanket (UASB) process: a review.
Fate of linear alkylbenzene sulfonates in the environment: a review.
Numerical simulation of powder mixed electric discharge machining (PMEDM) using finite element method
Phosphate Removal from Aqueous Solution Using Coir-Pith Activated Carbon
The present study deals with the removal of phosphates from aqueous solution using activated carbon developed from coir pith. Batch adsorption experiments were performed to delineate the effect of…
Technology and research developments in powder mixed electric discharge machining (PMEDM)
River bank filtration in Haridwar, India: removal of turbidity, organics and bacteria
- R. R. Dash, E. V. P. Bhanu Prakash, Pradeep Kumar, I. Mehrotra, C. Sandhu, T. Grischek
- 19 February 2010
Improvement in the quality of river water filtered through a 17-m thick sand-gravel unconfined aquifer at a production well surrounded by surface-water bodies, in Haridwar (India), was studied.…
Optimizing feed force for turned parts through the Taguchi technique
The objective of the paper is to obtain an optimal setting of turning process parameters (cutting speed, feed rate and depth of cut) resulting in an optimal value of the feed force when machining…