Learn More
Among the methods used for determining the parameters necessary for design of wastewater settling tanks, settling column tests are used most commonly, because of their simplicity and low costs. These tests partly mimic the actual settling processes and allow the evaluation of total suspended solids (TSS) removal by settling. Wastewater samples collected(More)
This paper examines an urbanized catchment in Cosenza, Italy where an off-line basin intercepting CSOs was studied to illustrate reduction in CSO discharges to the Crati River. While the hydrologic transport of pollutant mass is never known a-priori and can be flow-limited, the volumetric requirements of the basin were modeled based on the classic(More)
Combined wastewater collection systems continue to serve as a common urban conveyance method in urban areas of Europe and older urban areas of the United States. This study uses combined wastewater collection system monitoring data from the urbanizing Liguori catchment and channel in Cosenza (Italy) to illustrate event-based delivery and distribution of(More)
The study analyzed the particle size distribution of particulate matter (PM) retained in two catch basins located, respectively, near a parking lot and a traffic intersection with common high levels of traffic activity. Also, the treatment performance of a filter medium was evaluated by laboratory testing. The experimental treatment results and the field(More)
Particulate matter (PM), which may serve as a vector of pollutants in both natural and human-impacted waters, is of primary interest in water quality studies, particularly for those conducted in urban areas. Separating solids from the liquid phase is one of the main goals of water treatment practices. Above all, the settling process is the most commonly(More)
In an urban environment, green roofs represent a sustainable solution for mitigating stormwater volumes and hydrograph peaks. So far, many literature studies have investigated the hydraulic efficiency and the subsurface runoff coefficient of green roofs, showing their strong variability according to several factors, including the characteristics of storm(More)
The main purpose of control measures in urban areas is to retain particulate matter washed out by stormwater over impermeable surfaces. In stormwater control measures, particulate matter removal typically occurs via sedimentation. Settling column tests were performed to examine the settling efficiency of such units using monodisperse and heterodisperse(More)
In urban and industrial environments, the constant increase of impermeable surfaces has produced drastic changes in the natural hydrological cycle. Decreasing green areas not only produce negative effects from a hydrological-hydraulic perspective, but also from an energy point of view, modifying the urban microclimate and generating, as shown in the(More)