• Publications
  • Influence
Development of electrospun PVdF-PAN membrane-based polymer electrolytes for lithium batteries
Abstract Electrospun fibrous membranes of composites of polyvinylidene fluoride and polyacrylonitrile (PVdF–PAN–ESFMs) are prepared with different proportions of PAN (25, 50 and 75%, w/w). TheExpand
  • 208
  • 6
Preparation and properties of new cross-linked polyurethane acrylate electrolytes for lithium batteries
Abstract A cross-linked polyurethane acrylate (PUA) is synthesized by end-capping a hexamethylene diisocyanate, hexamethylene diisocyanate/poly(ethylene glycol)-based prepolymer with hydroxy butylExpand
  • 56
  • 2
Textile‐based Electrochemical Sensing: Effect of Fabric Substrate and Detection of Nitroaromatic Explosives
This study examines the influence of textile substrates upon the behavior of wearable screen-printed electrodes and demonstrates the attractive sensing properties of these sensors towards theExpand
  • 73
  • 1
  • PDF
Poly(vinylidene fluoride)–polydiphenylamine composite electrospun membrane as high-performance polymer electrolyte for lithium batteries
Abstract Composites of poly(vinylidene fluoride) (PVdF)–polydiphenylamine (PDPA) are electrospun as nanofibrous membranes, PVdF–PDPA-CFM (CFM represents composite nanofibrous membrane). PolymerExpand
  • 56
  • 1
Silica‐Polyaniline Based Bienzyme Cholesterol Biosensor: Fabrication and Characterization
In the present investigation, silica-polyaniline based bienzyme cholesterol biosensor is fabricated through a simple one-step electrochemical method. The one-step fabrication process involvesExpand
  • 13
  • 1
Evaluation of a cross-linked polyurethane acrylate as polymer electrolyte for lithium batteries
Abstract A cross-linked polyurethane acrylate (CL-PUA) was synthesized by end capping 2,6-toluene diisocyanate (TDI)/poly(ethylene glycol) (PEG) based prepolymer with hydroxybutyl methacrylateExpand
  • 23
  • 1
Platinum particles dispersed poly(diphenylamine) modified electrode for methanol oxidation
Abstract A modified potentiostatic method, termed the ‘pulse pontentiostatic method’ (PPSM) was used to get nano fibrillar poly(diphenylamine) (PDPA) film on Indium tin oxide (ITO) coated glassExpand
  • 32
Fabrication of Functional Nanofibrous Ammonia Sensor
A nanofibrous sensor for ammonia gas is fabricated by electrospinning the composite of poly(diphenylamine) (PDPA) with poly(methyl methacrylate) (PMMA) onto the patterned interdigit electrode. TheExpand
  • 24
Preparation and characterization of polyurethane/poly(vinylidene fluoride) composites and evaluation as polymer electrolytes
Polymer composites (PU/PVdF) comprised of polyurethane (PU) and poly(vinylidene fluoride) (PVdF) were prepared. Polymer electrolytes were prepared with different amounts of lithium perchlorateExpand
  • 18
LiNi0.8Co0.2−xTixO2 nanoparticles: synthesis, structure, and evaluation of electrochemical properties for lithium ion cell application
Layered Ti-doped lithiated nickel cobaltate, LiNi0.8Co0.2 − xTixO2 (where x = 0.01, 0.03, and 0.05) nanopowders were prepared by wet-chemistry technique. The structural properties of synthesizedExpand
  • 10