Author pages are created from data sourced from our academic publisher partnerships and public sources.
- Publications
- Influence
Sliding polymers in the joint alloplastic
- P. Kowalewski, W. Wieleba
- Materials Science
- 2007
Endoprostheses make it possible to replace a sick or damaged joint with man-made elements. Thanks to numerous clinical trials and to progress in the manufacturing technology, the devices of this type… Expand
Impact of supply conditions of liquid nitrogen on tool wear and surface integrity when machining the Ti-6Al-4V titanium alloy
- Y. Ayed, G. Germain, A. P. Melsió, P. Kowalewski, D. Locufier
- Materials Science
- 9 June 2017
Cryogenic-assisted machining has already shown its advantages on the process and the machining parameters have been analysed. However, part of the coolant jet characteristics as the pressure and flow… Expand
Investigation of hydroxyapatite-titanium composite properties during heat treatment.
- A. Mamaeva, A. Kenzhegulov, P. Kowalewski, W. Wieleba
- Medicine, Engineering
- Acta of bioengineering and biomechanics
- 2017
A biocompatible hydroxyapatite (HA) coating with a thickness of about 18-20 microns was successfully deposited by radiofrequency (RF) magnetron sputtering on titanium substrates VT1-0. The data… Expand
Wear resistance of laser-induced annealing of AISI 316 (EN 1.4401) stainless steel
- K. Łęcka, A. Antończak, P. Kowalewski, M. Trzciński
- Materials Science
- 1 September 2018
Stanowisko do badań tribologicznych w złożonym ruchu cyklicznym toczno-ślizgowym
- P. Kowalewski, W. Wieleba, T. Leśniewski
- Materials Science
- 2007
- 18
Materiały polimerowe w uszczelnieniach - tarcie statyczne
- W. Wieleba, D. Capanidis, P. Kowalewski, M. Paszkowski
- Materials Science
- 2011
- 2
WPèYW UKSZTAèTOWANIA $LADÓW OBRÓBKI ELEMENTU STALOWEGO NA WèA$CIWO$CI TRIBOLOGICZNE MATERIAèÓW POLIMEROWYCH W OKRESIE DOCIERANIA THE INFLUENCE OF THE MASCHINING TRACK DIRECTION OF THE STEEL ELEMENT…
- P. Kowalewski, W. Wieleba, Janusz Woniak
- Materials Science
- 2005
Dynamic developement of polimeric production in last few years, makes aplication of this materials in machine construction very common. Very good trybology properties of polymeric materials, cause… Expand
Statyczno-kinetyczne charakterystyki tarcia kompozytów polimerowych przeznaczonych do regeneracji prowadnic obrabiarek
- Z. Pawelec, P. Kowalewski
- Materials Science
- 2014
- 2
Tribocorrosion behaviour of Ti6Al4V and AISI 316L in simulated normal and inflammatory conditions
- A. Brończyk, P. Kowalewski, Mateusz Samoraj
- Materials Science
- 11 July 2019
Abstract Frictional effects are often associated with the relative motion between certain metallic components used in bio-implants. In particular, it applies to metal-on-metal (MOM) friction joints,… Expand
...
1
2
3
4
5
...