• Publications
  • Influence
Optimization of biodiesel production from soybean oil in a microreactor
Abstract Transesterification of soybean oil with methanol in the presence of potassium hydroxide, as a catalyst, in a microreactor has been investigated. The transesterification reaction wasExpand
  • 94
  • 3
Using a wire coil insert for biodiesel production enhancement in a microreactor
Abstract In the present work, the application of wire coil to promote mixing in a microreactor during continuous production of biodiesel was studied. For this aim, soybean oil as a feedstock andExpand
  • 43
Improving the visible light photoelectrochemical activity of synthesized TiO2 nanotube arrays in an organic electrolyte containing sodium carbonate with doping by copper via single-step anodization
The main aim of this research is to improve the photocatalytic activity of TiO2 nanotubes by co-doping with copper and sodium for application in the water splitting process as a photoanode. TheExpand
  • 2
Effect of sodium carbonate as an additive on the morphology and photocatalytic activity of TiO2 nanotubes
Abstract The major purpose of this research is increasing the photocatalytic activity of TiO 2 nanotube arrays by doping with sodium and carbon for using in water splitting as photoanode. TheExpand
  • 4
Reductive leaching of indium from the residue of neutral leaching by using oxalic acid in sulfuric acid solution
The present study sought to assess the reductive leaching of indium from indium-bearing zinc ferrite by using oxalic acid as reducer in sulfuric acid solution. The effect of more main factorsExpand
Study on the morphology and photocatalytic activity of TiO2 nanotube arrays produced by anodizing in organic electrolyte with Ni, Na, and C as dopants
AbstractThe main purpose of this research work is to investigate the effect of nickel as metal dopant on the morphology and photocatalytic activity of TiO2 nanotube arrays synthesized in the organicExpand
Effect of Acetic and Lactic Acids on the Morphology and Photocatalytic Activity of TiO₂ Nanotubes.
Among different methods for fabricating TiO₂ nanotubes, electrochemical anodizing in organic electrolyte is the most preferred due to the formation of ordered and controllable nanotubes and low cost.Expand
Effect of Temperature and Anodizing Potential on the Photocatalytic Activity of TiO₂ Nanotubes.
In this research, the effect of temperature and anodizing voltage on the morphology and photocatalytic activity of TiO₂ nanotubes which were fabricated in the organic electrolyte containing sodiumExpand