• Publications
  • Influence
Effects of sodium content and calcination temperature on the morphology, structure and photocatalytic activity of nanotubular titanates.
Titanate nanotubes (TNT) were prepared via a hydrothermal treatment of TiO(2) powders (P25) in a 10 M NaOH solution at 150 degrees C for 24 h and subsequently washed with HCl aqueous solution ofExpand
  • 132
  • 4
Effects of synthesis temperature on the microstructures and basic dyes adsorption of titanate nanotubes.
The adsorption of two basic dyes (Basic Green 5 (BG5) and Basic Violet 10 (BV10)) onto titanate nanotubes (TNT) that were prepared via a hydrothermal method with different synthesis temperatures wasExpand
  • 116
  • 3
Application of MCM-41 for dyes removal from wastewater.
The adsorption of three basic dyes (Rhodamine B (RB), Crystal Violet (CV), and Methylene Green (MG)) and two acid dyes (Acid Red 1 (AR1) and Erioglaucine (EG)) onto MCM-41 was studied to examine theExpand
  • 152
  • 3
Application of titanate nanotubes for dyes adsorptive removal from aqueous solution.
The potential of adsorptive removal of basic dyes with titanate nanotubes (TNTs) and acid dyes with surfactant (hexadecyltrimethylammonium (HDTMA) chloride)-modified TNTs were investigated. TNTs wereExpand
  • 79
  • 3
Photocatalytic degradation of C.I. Basic Violet 10 using TiO2 catalysts supported by Y zeolite: An investigation of the effects of operational parameters
Abstract The physical and chemical states of zeolite-supported TiO 2 were evaluated via powder X-ray diffraction (XRD), Fourier transform infrared (FTIR) and nitrogen adsorption–desorption isotherms.Expand
  • 181
  • 2
Effects of sodium content on the microstructures and basic dye cation exchange of titanate nanotubes
Abstract The potential of titanate nanotubes (TNT) to remove basic dye (Basic Violet 3, BV3) from aqueous solution through a cation exchange mechanism was investigated. TNT was prepared via aExpand
  • 54
  • 2
Adsorptive Removal of Acid Red 1 from Aqueous Solution with Surfactant Modified Titanate Nanotubes
The potential of adsorptive removal of acid dyes with surfactant modified titanate nanotubes (TNT) was investigated. TNT was prepared via a hydrothermal method and subsequently washed with a 10−4 NExpand
  • 18
  • 1
The synthetic parameters for the preparation of nanotubular titanate with highly photocatalytic activity
Abstract A detail study for the effects of synthetic parameters, including acid washing concentration, heat treatment, and synthesis temperature, on the photocatalytic degradation performance ofExpand
  • 29
  • 1
Short communication Application of titanate nanotubes for dyes adsorptive removal from aqueous solution
The potential of adsorptive removal of basic dyes with titanate nanotubes (TNTs) and acid dyes with surfactant (hexadecyltrimethylammonium (HDTMA) chloride)-modified TNTs were investigated. TNTs wereExpand