Masayuki Chikamatsu

Learn More
We analyzed the crystallization process of the CH3NH3PbI3 perovskite by observing real-time X-ray diffraction immediately after combining a PbI2 thin film with a CH3NH3I solution. A detailed analysis of the transformation kinetics demonstrated the fractal diffusion of the CH3NH3I solution into the PbI2 film. Moreover, the perovskite crystal was found to be(More)
Solution processibility is a unique advantage of organic semiconductors, permitting the low-cost production of flexible electronics under ambient conditions. However, the solution affinity to substrate surfaces remains a serious dilemma; liquid manipulation is more difficult on highly hydrophobic surfaces, but the use of such surfaces is indispensable for(More)
We investigate the structural influences on the device performance, especially on open-circuit voltage (V(OC)) in squaraine (SQ)/fullerene (C60) bilayer cells. Simply changing the SQ thickness could lead to 40% variation in V(OC) from 0.62 to 0.86 V. The ionization potential (IP) of SQ films and recombination at the anode surface as well as donor/acceptor(More)
A polydimethylsiloxane stamp was applied for the first time to the fabrication of n-channel thin-film transistors based on soluble small molecule organic semiconducting materials. The stamping method was found to facilitate film transfer onto a gate insulator surface irrespective of its surface free energy. We used [6,6]-phenyl-C(61)-butyric acid methyl(More)
Poly(2,5-dioctyloxy-1,4-phenylenevinylene) (DOPPV) was found to form a highly oriented film by a friction-transfer technique. Structural investigation of friction-transferred DOPPV was studied by means of polarized ultraviolet-visible (UV-vis) absorption spectroscopy, polarized photoluminescence (PL) spectroscopy, and synchrotron-sourced grazing incident(More)
Organolead-halide perovskites can be promising materials for next-generation solar cells because of its high power conversion efficiency. The method of precise fabrication is required because both solution-process and vacuum-process fabrication of the perovskite have problems of controllability and reproducibility. Vacuum deposition process was expected to(More)
  • 1