Marc Madou

Learn More
In this paper, a comprehensive approach to numerical and experimental analysis of microchamber filling in centrifugal microfluidics is presented. In the development of micro total analysis systems, it is often necessary to achieve complete, uniform filling of relatively large microchambers, such as those needed for nucleic acid amplification or detection.(More)
This paper presents a theoretical development and critical analysis of the burst frequency equations for capillary valves on a microfluidic compact disc (CD) platform. This analysis includes background on passive capillary valves and the governing models/equations that have been developed to date. The implicit assumptions and limitations of these models are(More)
This paper introduces novel vacuum/compression valves (VCVs) utilizing paraffin wax. A VCV is implemented by sealing the venting channel/hole with wax plugs (for normally-closed valve), or to be sealed by wax (for normally-open valve), and is activated by localized heating on the CD surface. We demonstrate that the VCV provides the advantages of avoiding(More)
We review the utility of centrifugal microfluidic technologies applied to point-of-care diagnosis in extremely under-resourced environments. The various challenges faced in these settings are showcased, using areas in India and Africa as examples. Measures for the ability of integrated devices to effectively address point-of-care challenges are highlighted,(More)
A novel method for the direct fabrication of arrays of micropatterned polymeric and carbon nanofiber structures on any substrate is developed. First SU-8, an epoxy-based negative photoresist, is electrospun under optimized conditions to produce a layer of polymeric nanofibers. Next, this nanofibrous mat is micropatterned using photolithography, and finally,(More)
In this paper, we propose an easy-to-implement passive liquid valve (PLV) for the microfluidic compact-disc (CD). This valve can be implemented by introducing venting chambers to control the air flow of the source and destination chambers. The PLV mechanism is based on equalizing the main forces acting on the microfluidic CD (i.e., the centrifugal and(More)
The development of micro-power generators for centrifugal microfluidic discs enhances the platform as a green point-of-care diagnostic system and eliminates the need for attaching external peripherals to the disc. In this work, we present micro-power generators that harvest energy from the disc's rotational movement to power biomedical applications on the(More)
Biomimetics often provides efficient ways to create a product incorporating novel properties. Here we present the replication of the Pieris rapae butterfly optical structure. This butterfly has white wings with black spots. The white coloration is produced by light scattering on pterin beads ranging from 100 to 500 nm whereas black spots correspond to areas(More)
With the development of nanomaterial-based nanodevices, it became inevitable to develop cost-effective and simple nanofabrication technologies enabling the formation of nanomaterial assembly in a controllable manner. Herein, we present suspended monolithic carbon single nanowires and nanomeshes bridging two bulk carbon posts, fabricated in a designed manner(More)