• Publications
  • Influence
GPS and Map matching based vehicle accident detection system
TLDR
This paper proposes to detect an accident from the map matched position of a vehicle by utilizing the GPS speed data and map matching algorithm and send accident location to an Alert Service Center and utilizing the GSM network. Expand
Kalman filtered GPS accelerometerbased accident detection and location system
TLDR
A low-cost accident detection system utilizing cheap ADXL345 accelerometers and GPS receiver and Kalman filter to correct the accumulated double integration errors with the trusted GPS data is proposed. Expand
Advancement of CMOS Schmitt Trigger Circuits
TLDR
A review on the advancement of Schmitt trigger circuits are illustrated in different literatures is discussed with their merits and demerits. Expand
Low cost GPS/IMU integrated accident detection and location system
TLDR
An accident detection system by determining the deceleration from the accelerometers of a low cost Micro Electro Mechanical Systems (MEMS) based Inertial Measurement Unit (IMU) based on the data of the three axes accelerometers, gyroscopes and magnetometers of the IMU. Expand
Active inductor based fully integrated CMOS transmit/ receive switch for 2.4 GHz RF transceiver.
TLDR
The proposed active inductor-based T/R switch in 0.13µm CMOS process will be highly useful for the electronic industries where low-power, high-performance and compactness of devices are the crucial concerns. Expand
Designing a Ring-VCO for RFID Transponders in 0.18 μm CMOS Process
TLDR
A low power, low phase noise ring-VCO developed for 2.42 GHz operated active RFID transponders compatible with IEEE 802.11 b/g, Bluetooth, and Zigbee protocols is proposed. Expand
A CMOS POWER SPLITTER FOR 2,45 GHz ISM BAND RFID READER IN 0,18 µm CMOS TECHNOLOGY
CMOS razdvajac snage za 2,45 GHz citac polja ISM RFID u 0,18 µm CMOS tehnologiji Izvorni znanstveni clanak Identifikacija radio frekvencije (RFID) je jedna od najbrže rastucih tehnologija uporabljivaExpand
A low loss wide swing cascode current mirror in 0.18-μm CMOS technology
Current mirror is an essential component in analog integrated circuit design for biasing and constant current generation. In this paper a design of a wide swing cascode current mirror circuit (WSCCM)Expand
Design of a low power and wide band true single-phase clock frequency divider
TLDR
In this paper an ultra-low power wide band 2/3 prescaler simulated by CEDEC 0.18 μm CMOS technology is presented and more than 50% reduction in total power consumption is achieved for both divide-by-2 and divideby-3 operations. Expand
...
1
2
3
4
5
...