• Publications
  • Influence
Effect of Thermomechanical Processing on the Microstructure and Properties of a Low Carbon Copper Bearing Steel
A boron treated copper bearing HSLA steel containing austenite formers like manganese and nickel, somewhat lower in amount than that in HSLA 100 variety of steel is chosen for the study. The role ofExpand
  • 18
  • 1
Effect of sintering on structure and mechanical properties of alumina–15 vol% zirconia nanocomposite compacts
Abstract The sintering and densification behavior of high energy ball milled (HEBM-ed) alumina–15 vol% zirconia nanocomposite were carried out and the probable tetragonal to monoclinic phaseExpand
  • 16
Effect of thermomechanical processing and aging on microstructure and precipitation hardening in low carbon Cu–B steel
Abstract The effect of thermomechanical controlled processing (TMCP) on structural refinement and enhancement of properties of a low carbon Cu–B high strength low alloy steel has been investigated.Expand
  • 12
Martensitic Non-stainless Steels: High Strength and High Alloy
This module provides information about non-stainless martensitic steels; after a general introduction, discussion is made on chemical composition and properties of common grades of maraging steels.Expand
  • 8
Warm working characterization of low carbon steel in hot rolling
Abstract In present investigation, warm working characteristics of ferrite were studied for 0.044C-1.51Cu-1.52Mn-0.064Ti steel by Scanning Electron Microscopy images, Energy-dispersive X -rayExpand
  • 2
DEVELOPMENT OF MECHANICALLY ALLOYED ALSIMG-SICP METAL MATRIX COMPOSITES WITH TRACE SCANDIUM ADDITIONS
AlSiMg-SiC composites with trace addition of scandium were produced through the mechanical alloy technique. The age hardening behaviour of the composites were studied to characterise the effect ofExpand
Study the kinetics involved in solid state reduction of mill scale with lean grade coal and optimization of process parameters involved in reduction through rotary kiln furnace
Abstract Present investigation envisages kinetics involved in solid state reduction of mill scale surrounded by lean grade coal powder in static and dynamic processes. Research aims to evaluate theExpand
Bioceramic composites for orthopaedic applications: A comprehensive review of mechanical, biological, and microstructural properties
Abstract Bioceramics have been widely utilized for orthopaedic applications in which the biocompatibility and mechanical properties of the materials are vital characteristics to be considered forExpand
  • 4
Reverse martensitic transformation in alumina–15 vol% zirconia nanostructured powder synthesized by high energy ball milling
Abstract In the present work, three alumina–15 vol% zirconia composites with Y 2 O 3 , MgO as dopants and without oxide as dopant have been investigated. High energy ball milling (HEBM) provides theExpand
  • 10
EVOLUTION OF MICROSTRUCTURE IN MICROALLOYED STEEL UNDER CONTINUOUS COOLING
The evolution of microstructure under continuous cooling is studied with the help of transmission electron microscopic observation. It is found that the phase transformation in microalloyed steel isExpand
  • 2
...
1
2
...