• Publications
  • Influence
Effects of two amine reducing agents on the degree of conversion and physical properties of an unfilled light-cured resin.
  • K. Yoshida, E. Greener
  • Materials Science, Medicine
  • Dental materials : official publication of the…
  • 1 July 1993
The influence of varying concentrations of two amine reducing agents commonly used in commercial light-cured composites, N,N-dimethyl-p-toluidine (DMPT) and 2-(N,N-dimethylamino)ethyl methacrylateExpand
  • 64
  • 8
Topographical variations in a plant–soil system along a slope on Mt Ryuoh, Japan
The plant–soil system was studied at different topographic levels (i.e. ridge, backslope and footslope) along a slope in a Cryptomeria plantation. Soil solution chemistry at each representativeExpand
  • 47
  • 3
Dense arrays of highly aligned graphene nanoribbons produced by substrate-controlled metal-assisted etching of graphene.
Dense arrays of aligned graphene nanoribbons (GNRs) are fabricated by substrate-controlled etching of large-area single-layer graphene. An adequate choice of etching substrate and catalyst depositionExpand
  • 25
  • 1
Thioglucose-stabilized gold nanoparticles as a novel platform for colorimetric bioassay based on nanoparticle aggregation.
Gold nanoparticles stabilized with thioglucose (TGlu-AuNPs), which have carboxyl groups on the particle surface as anchoring sites for covalent immobilization of biomolecules, were prepared by theExpand
  • 35
Abrasion resistance of titanium nitride coatings formed on titanium by ion-beam-assisted deposition.
To improve the physical properties of the pure titanium surface, thin titanium nitride (TiN) films were deposited by means of ion-beam-assisted deposition. Film structure was confirmed as TiN byExpand
  • 23
Spectroscopic studies of three osseointegrated implants.
OBJECTIVES The purpose of this study was to investigate the surface characteristics of titanium implants. METHODS The chemical state of the surfaces of three types of osseointegrated titaniumExpand
  • 23
Chemical adhesion rather than mechanical retention enhances resin bond durability of a dental glass-ceramic with leucite crystallites.
This study aims to evaluate the effect of chemical adhesion by a silane coupler and mechanical retention by hydrofluoric acid (HFA) etching on the bond durability of resin to a dental glass ceramicExpand
  • 12
Shear bond strengths of two luting cements to laboratory-cured prosthetic resin composite.
This study evaluated the effect of four types of surface preparations for laboratory-cured prosthetic resin composite on the shear bond strengths of glass ionomer and resin luting cements. Two sizesExpand
  • 10
Effects of coupling agents on mechanical properties of metal oxide-polymethacrylate composites.
The effects of several coupling agents on the mechanical properties of metal oxide-polymethacrylate composites reinforced with titanium dioxide (TiO2), aluminium oxide (Al2O3), silica (SiO2) andExpand
  • 19
Influence of Ionomer/Carbon Ratio on the Performance of a Polymer Electrolyte Fuel Cell
We have used fibrous carbon materials as polymer electrolyte fuel cell (PEFC) electrodes. We have examined the influence of the ionomer/carbon ratio on the performance of the PEFCs. The Marimo carbonExpand
  • 18
  • PDF