Jinjoo Park

  • Citations Per Year
Learn More
RMRP, the RNA component of mitochondrial RNA processing endoribonuclease, is a non-coding RNA (ncRNA) part of the RNase MRP complex functioning in mitochondrial and ribosomal RNA processing. Even though various mutations in the RMRP gene are linked to developmental defects and pathogenesis, its relevance to cancer etiology has not been well established.(More)
Aluminum-doped zinc oxide (ZnO:Al) [AZO] is a good candidate to be used as a transparent conducting oxide [TCO]. For solar cells having a hydrogenated amorphous silicon carbide [a-SiC:H] or hydrogenated amorphous silicon [a-Si:H] window layer, the use of the AZO as TCO results in a deterioration of fill factor [FF], so fluorine-doped tin oxide (Sn02:F)(More)
For thin film silicon-based solar cells, effective light trapping at a broad range of wavelengths (400-1100 nm) is necessary. Normally, etching is only carried out with TCOs, such as SnO2:F and impurity doped ZnO, to form nano-sized craters in the surface morphology to confer a light trapping effect. However, in this study, prior to ZnO:Al etching, periodic(More)
This article mainly discusses the difference between p-i-n and n-i-p type solar cells. Their structural difference has an effect on cell performance, such as open circuit voltage and fill factor. Although the deposition conditions are the same for both p-i-n and n-i-p cases, the substrate layers for depositing p-type microcrystalline silicon layers differ.(More)
Highly conducting boron-doped microcrystalline silicon (p-type μc-Si:H) thin films have been prepared by radio frequency plasma-enhanced chemical-vapor deposition (RF-PECVD). In this work, the effects of hydrogen dilution, doping ratio, plasma power, deposition pressure and substrate temperature on the growth and the properties of boron-doped(More)
Electrode distances and gas flow ratios are important parameters for fabricating intrinsic (i-type) layers of hydrogenated amorphous silicon (a-Si:H) films using a very high frequency plasma-enhanced chemical-vapor deposition (VHF-PECVD) system. In this work, we investigated the relationship between the electrode distances and gas flow ratios on the(More)
We investigated thin film silicon solar cells with boron doped hydrogenated nanocrystalline silicon/ hydrogenated amorphous silicon oxide [p-type nc-Si:H/a-SiOx:H] layer. First, we researched the bandgap engineering of diborane (B2H6) doped wide bandgap hydrogenated nanocryslline silicon (p-type nc-Si:H) films, which have excellent electrical properties of(More)
Intrinsic hydrogenated amorphous silicon-germanium (a-SiGe:H) alloy is generally used in the bottom cell because of its low band gap. The a-SiGe:H has a higher photo conductivity in comparison to the a-Si:H; thus, it is expected that the a-SiGe:H can show better short circuit current density than that of the a-Si:H based solar cell. Therefore, we optimized(More)
Nonvolatile memory (NVM) with silicon dioxide/silicon nitride/silicon oxynitride (ONO(n)) charge trap structure is a promising flash memory technology duo that will fulfill process compatibility for system-on-panel displays, down-scaling cell size and low operation voltage. In this research, charge trap flash devices were fabricated with ONO(n) stack gate(More)
We report aluminum doped zinc oxide (AZO) films with high work function as an insertion layer between transparent conducting oxides (TCO) and hydrogenated amorphous silicon carbide (a-SiC:H) layer to improve open circuit voltage (V(oc)) and fill factor (FF) for thin film solar cells. Amorphous silicon (a-Si:H) solar cells exhibit poor fill factors due to a(More)