Author pages are created from data sourced from our academic publisher partnerships and public sources.
Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing - A novel Rheo-process
- S. Tzamtzis, N. S. Barekar, N. H. Babu, J. Patel, B. Dhindaw, Z. Fan
- Materials Science
- 1 February 2009
Particulate metal matrix composites (PMMCS) have attracted interest for application in numerous holds. The current processing methods often produce agglomerated particles in the ductile matrix and as… Expand
Melt conditioning by advanced shear technology (MCAST) for refining solidification microstructures
Abstract MCAST (melt conditioning by advanced shear technology) is a novel processing technology developed recently for conditioning liquid metal prior to solidification processing. The MCAST process… Expand
Differential antagonism of the anticonflict effects of typical and atypical anxiolytics.
Selected benzodiazepine and non-benzodiazepine agents were studied alone or in the presence of benzodiazepine antagonists in the shock-induced suppression of drinking (SSD) procedure in rats. The… Expand
Meropenem: evidence of lack of proconvulsive tendency in mice.
The proconvulsive tendency of the novel carbapenem, meropenem was compared to that of imipenem, alone and in combination with cilastatin. The potentiation of metrazole-induced convulsions in mice was… Expand
High coercivity, epitaxial Sm–Co films with uniaxial in-plane anisotropy
Epitaxial Sm–Co(1100) and (1120) films have been grown by magnetron sputtering onto Cr(211) and (100) buffer layers, respectively. The Sm–Co(1100) films exhibit uniaxial in-plane anisotropies of… Expand
Weibull statistical analysis of the effect of melt conditioning on the mechanical properties of AM60 alloy
Abstract The mechanical properties of the standard tensile samples of AM60 Mg-alloy obtained by conventional high pressure die casting (HPDC) and by melt conditioned high pressure die casting… Expand
Solidification and processing of aluminium based immiscible alloys
The Al-Sn and Al-Pb based immiscible alloys have significant potential for bearing applications. However, the mixing and understanding of solidification process for immiscible alloys have been long… Expand
Melt Protection of Mg-Al Based Alloys
This paper reports the current status of Mg melt protection in view to identify near-future challenges, but also opportunities, for Mg melt protection of Mg-Al based alloys. The goal is to design and… Expand
Grain refinement of DHP copper by elemental additions
Abstract The effects of additions of P and Ag, as well as the de-embrittling elements of copper—B, Mg, Ca, Ti and Zr—in concentrations of 0.085–0.5 wt-% to give some variations in contents within and… Expand
Effect of melt conditioning on heat treatment and mechanical properties of AZ31 alloy strips produced by twin roll casting
EPSRC – LiME, UK and Towards Affordable, Closed-Loop Recyclable Future Low Carbon Vehicle Structures – TARF-LCV(EP/I038616/1), Department of Mechanical Engineering, Imperial College London, UK, Mr.… Expand