• Publications
  • Influence
Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process
Abstract Using cheap waterglass as silica source, silica aerogels were synthesized via a novel fast ambient drying by using an ethanol/trimethylchlorosilane (TMCS)/Heptane solution for modificationExpand
  • 168
  • 3
Sol–gel deposited TiO2 film on NiTi surgical alloy for biocompatibility improvement
TiO2 thin films were prepared on NiTi surgical alloy by sol–gel method. The forming process, surface morphology and structure of the films were studied by X-ray diffraction and atomic forceExpand
  • 232
  • 2
Cost-effective synthesis of silica aerogels from fly ash via ambient pressure drying
Abstract Silica aerogels were synthesized from the industrial fly ash by ambient pressure drying method. The process consists of two stages, preparation of sodium silicate solution from fly ash byExpand
  • 46
  • 1
Solvothermal synthesis and characterization of tungsten oxides with controllable morphology and crystal phase
Abstract Tungsten oxides with various morphologies and crystal phases were synthesized by solvothermal reactions at 200 °C for 7–12 h using different solvents. The morphology and crystal phase ofExpand
  • 27
  • 1
Synthesis of Chitosan-Hydroxyapatite Composites and Its Effect on the Properties of Bioglass Bone Cement
Chitosan-hydroxyapatite (CS-HA) composite powders were synthesized via in situ co-precipitation method, through the reaction of Ca(NO3)2 and H3PO4 in the simulated body fluid (SBF) containingExpand
  • 7
  • 1
Influences of solvothermal-assisted crystallization process on the microstructure and properties of SiO2-W0.02TiO2.06 composite aerogels synthesized via ambient pressure drying
In this work, the influence of solvothermal crystallization processes on the microstructure, pore characteristic, and adsorption/photocatalysis of SiO2-W0.02TiO2.06 composite aerogels synthesized viaExpand
  • 1
  • 1
Nanocrystalline CsxWO3 particles: Effects of N2 annealing on microstructure and near-infrared shielding characteristics
Abstract In order to further improve the near-infrared shielding properties of cesium tungsten bronze (CsxWO3) for solar filter applications, CsxWO3 particles were prepared by solvothermal reactionExpand
  • 15
  • 1
Microstructure and electrical–optical properties of cesium tungsten oxides synthesized by solvothermal reaction followed by ammonia annealing
Cesium tungsten oxides (Cs{sub x}WO{sub 3}) were synthesized by solvothermal reactions using ethanol and 57.1 vol% ethanol aqueous solution at 200 {sup o}C for 12 h, and the effects of post annealingExpand
  • 43
Effect of Heat Treatment on Silica Aerogels Prepared via Ambient Drying
Silica aerogels were prepared at ambient drying by using ethanol/trimethylchlorosilane (TMCS)/heptane solution as pore water exchange and surface modification of the wet gel before drying. TheExpand
  • 28
...
1
2
3
4
5
...