• Publications
  • Influence
Evaluation of electrical conductivity models for conductive polymer composites
The electrical conductivity of polymeric materials can be increased by the addition of carbon fillers, such as carbon fibers and graphite. The resulting composites could be used in applications suchExpand
  • 138
  • 6
Mechanical properties of graphene nanoplatelet/epoxy composites
Due to their high specific stiffness, carbon-filled epoxy composites can be used in structural components in aircraft. Graphene nanoplatelets are short stacks of individual layers of graphite thatExpand
  • 85
  • 5
MECHANICAL PROPERTIES OF GRAPHENE NANOPLATELET/EPOXY COMPOSITES
Because of their high-specific stiffness, carbon-filled epoxy composites can be used in structural components in fixed-wing aircraft. Graphene nanoplatelets (GNPs) are short stacks of individualExpand
  • 167
  • 3
  • PDF
In vitro flexural properties of hydroxyapatite and self-reinforced poly(L-lactic acid).
Poly(L-lactic acid) (PLLA) has been used for fracture fixation devices, but its use is limited because of its poor biocompatibility and mechanical properties. The effects of extrusion, incorporationExpand
  • 25
  • 2
Electrically and thermally conductive nylon 6,6
Increasing the thermal and electrical conductivity of typically insulating polymers, such as nylon 6,6, opens new markets. A thermally conductive resin can be used for heat sink applications. AnExpand
  • 98
  • 2
Development of an additive equation for predicting the electrical conductivity of carbon‐filled composites
The electrical conductivity of polymeric materials can be increased by the addition of carbon fillers. The resulting composites can be used in applications such as electrostatic dissipation andExpand
  • 94
  • 2
Shielding effectiveness density theory for carbon fiber/ nylon 6,6 composites
We present a simple density theory based on first principles that predicts the shielding effectiveness of composite matrix materials at filler loadings near or above the percolation threshold. Such aExpand
  • 35
  • 2
  • PDF
Tensile and impact properties of carbon filled nylon-6,6 based resins
Electrically and thermally conductive resins can be produced by adding conductive fillers to insulating polymers. Mechanical properties such as tensile modulus, ultimate tensile stress, strain atExpand
  • 27
  • 2
  • PDF
Thermoelectric behavior of organic thin film nanocomposites
Organic thin film nanocomposites, prepared by liq- uid-phase exfoliation, were investigated for their superior electrical properties and thermoelectric behavior. Single- walled carbon nanotubesExpand
  • 72
  • 1
Nanoindentation of injection molded PLA and self-reinforced composite PLA after in vitro conditioning for three months.
Poly(lactic acid) (PLA) is used for medical devices such as sutures or orthopedic screws. A standard way to determine the loss of mechanical properties of a degradable polymer would be to soak theExpand
  • 49
  • 1
  • PDF
...
1
2
3
4
5
...