• Publications
  • Influence
Performance enhancement of pulsed solid state power amplifier using Drain Modulation over Gate Modulation
TLDR
The study was conducted to compare the RF parameters of Pulsed Solid State Power Amplifier using Drain modulation and Gate Modulation and thereby to analyze the impact of modulations on the pulsed performance. Expand
  • 9
  • 1
Nonlinear Design of a C band Power Amplifier using EEHEMT Nonlinear Model
TLDR
This paper illustrates the nonlinear design of a single stage C band power amplifier. Expand
  • 8
Enclosure Effect on Microwave Power Amplifier
The package design for microwave sub-systems requires adequate knowledge of electromagnetic field distribution inside the package housing. The cavity resonance of the microwave amplifier not onlyExpand
  • 8
Nonlinear model based Power Amplifier
This paper illustrates the nonlinear design and realization of MESFET nonlinear model based Power Amplifier to deliver minimum 12watt output power with 37% efficiency at operating Vds of 9V. CriticalExpand
  • 3
C-BAND PULSED SOLID STATE POWER AMPLIFIER FOR SPACEBORNE APPLICATIONS
The basic applications of pulsed solid state power amplifler are for airborne and spaceborne pulsed Radar and these applications have always demanded well performance over difierent environmentalExpand
  • 2
  • PDF
Design and Development of a Narrow Band Dielectric Resonator Filter at Ku Band
This paper describes the design and development of very Narrow Bandwidth Ku-Band Filter required for Frequency Generator. It will provide desired in-band response in very narrow bandwidth 0.05 % andExpand
  • 1
Broadband pulsed high power amplifier design using load-pull technique
This paper illustrates the nonlinear design and realization of L-Band broadband pulsed high power amplifier to deliver peak output power of 45 W at centre frequency of 1.25 GHz with 20% bandwidth. ToExpand
  • 1
Space grade multi-output 10.6 watt electronic power conditioner with high efficiency
This paper describes the design and development of a 10.6 watt EPC using pushpull topology at 100 kilo Hertz switching frequency. This multiple output EPC is designed for 70±2 volt DC input voltage.Expand
Active Radar Calibrator Electronics for RISAT-1
This paper presents the details of design and development of Active Radar Calibrator Electronics for RISAT-1. Active Radar Calibrators are ground based point targets, having wide range ofExpand
Spaceborne C-band Pulsed Solid State Power Amplifier
This paper describes the design and development of a C-band Pulsed SSPA to deliver 12-watt output power with 45 dB gain. Salient features of this design are the use of drain biasing technique forExpand
  • 2
...
1
2
...