• Publications
  • Influence
Casting Pure Titanium into Commercial Phosphate-bonded SiO2 Investment Molds
Pure titanium was cast into five different phosphate-bonded SiO2 investment mold materials (at 350°C) with an argon-arc melting and pressure casting machine. The mesh castability, the fit of the MODExpand
  • 85
  • 2
A comparison of the fatigue behavior of cast Ti-7.5Mo with c.p. titanium, Ti-6Al-4V and Ti-13Nb-13Zr alloys.
The purpose of the present study is to compare the high-cycle fatigue behavior of newly developed Ti-7.5Mo alloy with that of c.p. Ti, Ti-13Nb-13Zr and Ti-6Al-4V alloys in their as-cast state.Expand
  • 120
  • 2
Structure-property relationship of cast Ti-Nb alloys.
The present work is a study of the microstructure, mechanical properties and corrosion behaviour of a series of binary Ti-Nb alloys with Nb contents up to 35 wt%, with emphasis placed on theExpand
  • 207
  • 1
Structure and properties of Titanium–25 Niobium–x iron alloys
The present work studies the effect of iron on microstructure, mechanical properties and corrosion behavior of Ti–25Nb based system with emphasis on improving strength/modulus ratio. ExperimentalExpand
  • 37
  • 1
Effect of nickel addition on microstructure and properties of Ti-Co-Ni alloys.
The focus of this study was placed on the effect of nickel addition (5 wt%) on the microstructure, castability, biocorrosion resistance and some other properties of a series of cast high-cobalt (upExpand
  • 8
  • 1
Particle size effect on structure and properties of dispersed Pd-containing dental amalgam.
Focus of the study is to evaluate the effect of dispersant particle size on the structure and various properties of spherical matrix, irregular dispersant admixed type Pd amalgams. The resultsExpand
  • 7
  • 1
Effect of ball milling on structures and properties of dispersed-type dental amalgam.
OBJECTIVES The purpose of the present study was to investigate the effect of ball milling on the initial mercury vapor release rate and mechanical properties such as compressive strength, diametralExpand
  • 2
  • 1
Microstructures of high copper amalgams after corrosion in various solutions.
Abstract Five copper rich amalgam systems were studied to detect corrosion induced microstructural changes after immersion in various solutions for 2.5 years. The solutions were artificial saliva, 10Expand
  • 9
Bioresorption behavior of tetracalcium phosphate-derived calcium phosphate cement implanted in femur of rabbits.
One primary focus of the present study was to clarify the crucial resorption-location relationship of a recently developed single-phase TTCP-derived calcium phosphate cement (CPC) implanted in rabbitExpand
  • 64
Structure and properties of hydroxyapatite-bioactive glass composites plasma sprayed on Ti6Al4V
Hydroxyapatite (HA)-coated Ti6Al4V has recently been used as a bone substitute in orthopaedic and dental applications because of its favourable bioactivity and mechanical properties. Studies in theExpand
  • 53
...
1
2
3
4
...