• Publications
  • Influence
Application of Electrical Properties to Differentiate Lard from Tallow and Palm Oil
This study aimed to differentiate lard from tallow and palm oil based on its electrical properties, namely conductance, impedance and capacitance. These properties were measured at spectraExpand
  • 16
  • 1
  • PDF
Reduction of High Purity Silicon from Bamboo Leaf as Basic Material in Development of Sensors Manufacture in Satellite Technology
Silicon is a semiconductor material that has been widely used in sensors and other electronic equipments. Bamboo leaf is an agro-waste that can be a potential source of silicon in Indonesia due toExpand
  • 12
  • 1
Modified Spin Coating Method for Coating and Fabricating Ferroelectric Thin Films as Sensors and Solar Cells
Spin coating process with a modified spin coater is performed well, especially the second generation of modified spin coater, which has a maximum value of 18,000 rpm, is able forExpand
  • 2
  • 1
  • PDF
Simulation of Heat Transfer in Cylinder Husks Furnace with Finite Difference Method
Simulation of heat transfer on cylinder husk furnace with FDM (Finite Difference Method) has been performed. This simulation aimed to study the heat transfer based on conduction and convectionExpand
  • 2
  • 1
Preparation and Optical Properties Study of CuO thin Film as Applied Solar Cell on LAPAN-IPB Satellite
Abstract In this study, copper oxide (CuO) thin films were deposited by chemical solution deposition (CSD) method with layer variation to observed and determined crystal structure and opticalExpand
  • 44
Potential of conductance measurement for lard detection
Relative cheapness of lard cause it is often mixed to reduce production cost in the food industry. Therefore, it is important to purpose a detection lard contamination. In this paper, we evaluate theExpand
  • 11
  • PDF
Optimization process of glycerol esterification using real time adaptive control
TLDR
The synthesis reaction used in esterification needs high energy consumption and a precise processing time to get the best yield of target. Expand
  • 1
  • PDF
The optical band gap of LiTaO3 and Nb2O5-doped LiTaO3 thin films based on Tauc Plot method to be applied on satellite
This research observed the optical band gap of thin films made from LiTaO3 undoped (0%) and doped (5% and 10%) with Nb2O5 in the 1 M-solubility deposited on n-type Si (111) substrates. The thin filmsExpand
  • 12
ELECTRICAL PROPERTIES TEST OF DIELECTRIC CONSTANT AND IMPEDANCE CHARACTERISTIC THIN FILMS OF LiTaO 3 AND 10 % Ga 2 O 3 DOPED LiTaO
This study aims to investigatedielectric constant and impedance characteristic of thin films made from LiTaO3 without (0%) and with doping (10%) Ga2O3. The solubility of LiTaO3 for the purpose ofExpand
  • 3
  • PDF