• Publications
  • Influence
Thermal conductivity of particle filled polyethylene composite materials
In this study, the effective thermal conductivity of aluminum filled high-density polyethylene composites is investigated numerically as a function of filler concentration. The obtained values areExpand
Thermal and mechanical properties of aluminum powder‐filled high‐density polyethylene composites
Thermal conductivity and mechanical properties such as tensile strength, elongation at break, and modulus of elasticity of aluminum powder-filled high-density polyethylene composites are investigatedExpand
Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber–matrix for composite materials
Abstract In this study, flax fibers were treated by argon and air atmospheric pressure plasma systems under various plasma powers to improve interfacial adhesion between the flax fiber and highExpand
Thermal Conductivity and Viscosity Measurements of Water-Based TiO2 Nanofluids
In this study, the thermal conductivity and viscosity of TiO2 nanoparticles in deionized water were investigated up to a volume fraction of 3% of particles. The nanofluid was prepared by dispersingExpand
A Numerical and Experimental Study on Thermal Conductivity of Particle Filled Polymer Composites
In this study, thermal conductivity of particle filled polymer composites is investigated numerically and experimentally. In the numerical study, the finite-element program ANSYS is used to calculateExpand
Thermal and mechanical properties of copper powder filled poly (ethylene) composites
Abstract The thermal conductivity and mechanical properties such as tensile strength, elongation at break, modulus of elasticity, and toughness of composites formed by copper powder filler embeddedExpand
Effective thermal conductivity of granular porous materials
In this study, various conduction models for two-phase materials are considered and the range of applicability of these models is discussed. Experimental work is carried out on construction sand ofExpand
Measurement of thermal conductivity of dairy products
Thermal conductivity of eleven kinds of cheese, four kinds of yogurt and a butter sample has been measured at about 15°C and 30°C. A modified hot wire method was used for thermal conductivityExpand
Measurement of Thermal Conductivity of Edible Oils Using Transient Hot Wire Method
Thermal conductivities of three different edible oils, namely sunflower oil, corn oil and olive oil, were measured at temperatures 25, 40, 60, and 80°C. The measurements were carried out using a hotExpand
Experimental investigation of viscosity and thermal conductivity of suspensions containing nanosized ceramic particles
Purpose: In this study we report measurements of effective thermal conductivity by using 3ω method and effective viscosity by vibro-viscometer for SiO2-water and Al2O3-water nanofluids at differentExpand
...
1
2
3
4
5
...