Hikaru Tateishi

  • Citations Per Year
Learn More
Graphene oxide (GO) nanosheets were reduced by UV irradiation in H2 or N2 under mild conditions (at room temperature) without a photocatalyst. Photoreduction proceeded even in an aqueous suspension of nanosheets. The GO nanosheets reduced by this method were analyzed by X-ray photoelectron spectroscopy and Raman spectroscopy. It was found that epoxy groups(More)
Understanding the chemical and physical properties of metal/graphene oxide (M/GO) interfaces is important when GO is used in electronic and electrochemical devices because the metal layer must be firmly attached to GO. Here, permeation of metal from the surface into GO paper bulk at the M/GO interface was observed at room temperature for metals such as Cu,(More)
Proton conductivities of layered solid electrolytes can be improved by minimizing strain along the conduction path. It is shown that the conductivities (σ) of multilayer graphene oxide (GO) films (assembled by the drop-cast method) are larger than those of single-layer GO (prepared by either the drop-cast or the Langmuir-Blodgett (LB) method). At 60%(More)
Combination of the superconductor and high conductive normal metal is now indispensable in the practical use of superconducting magnet. And the binding property of both materials is one of the key points whether superconductive characteristics are fully attained or the current fails prematurely in the practical magnet. But this binding evaluation is not so(More)
  • 1