- Full text PDF available (2)
- This year (0)
- Last 5 years (4)
- Last 10 years (6)
In this paper, a hot embossing heating roll with induction heater inside the roll is proposed. The induction heating coil is installed inside a roll that is used as a heating roll of a roll-to-roll (R2R) hot embossing apparatus. Using an inside installed heating coil gives the roll-to-roll hot embossing system a more even temperature distribution on the… (More)
Gravity ventilators rely simply on air buoyancy to extract air and are widely used to exhaust air contaminants and heat from workplaces using minimal energy. They are designed to maximize the exhaust flow rate, but the rain penetration sometimes causes malfunctioning. In this study, the characteristics of rain penetration through a ventilator were examined… (More)
In Microscopy and Microanalysis, an article, MAM1401332, Kim et al., was posted on First View, but shortly after, a co-author spotted an error at Figure 3c whereby a white rule appeared where it did not belong.
In this paper, we proposed a new method to increase the pattern quality on the polymer film graved by a roll-to-roll hot embossing apparatus. To expand the curing time during roll-to-roll hot embossing process, a belt is used around the patterned roller. This belt applies pressure on the film and patterned roller while the generated pattern cools down. To… (More)
This paper describes the analysis of Pneumatic Balloon Actuator (PBA). To do this, Finite Element Method (FEM) is used. In this paper, no-load characteristic of PBA is studied and through this, the displacement and stress of PBA can be calculated.
In this study, we examined the sensitivity of embossed pattern depth to preheat supply and cooling and investigated how the pattern type and density affect the embossed depth. The main factors that affect embossed pattern qualities of roll-to-roll hot embossing, such as roller temperature, roller speed, and applied force, were determined using the response… (More)