Author pages are created from data sourced from our academic publisher partnerships and public sources.
Share This Author
Sputtering deposited ternary Zn1−xCdxO crystal films on Si(111) substrates
Using the d.c. reactive magnetron sputtering method we have successfully deposited completely (002)-oriented ternary Zn1−xCdxO (0≤x≤0.6) alloy crystal films without Cd segregation on Si(111)… Expand
Comparison of GaN epitaxial films on silicon nitride buffer and Si()
Abstract The crystalline GaN films were grown on Si(1 1 1) or using Si 3 N 4 as a buffer layer by hot wall chemical vapor deposition. X-ray diffraction (XRD), photoluminescence (PL) and spreading… Expand
Preparation and properties of TiB2 nanoparticle reinforced copper matrix composites by in situ processing
Abstract A copper matrix composite reinforced by in situ TiB 2 nanoparticle was prepared by reactions of B 2 O 3 , carbon and titanium in copper–titanium melt. The microstructure and mechanical and… Expand
Quasi-aligned ZnO nanotubes grown on Si substrates
Quasi-aligned ZnO nanotubes have been grown on silicon substrates by metalorganic chemical vapor deposition without using any catalyst. Two kinds of ZnO nanotubular structures were found: Nanotubes… Expand
The influence of morphologies and doping of nanostructured ZnO on the field emission behaviors
The field-emission properties of the ZnO nanotip arrays, nanowire arrays as well as Al-doped ZnO nanowires were investigated in detail. After comparison of the different morphologies, it was found… Expand
Corrosion Protection of Graphene-Modified Zinc-Rich Epoxy Coatings in Dilute NaCl Solution
In order to hold the excellent corrosion resistance of zinc-rich epoxy coatings with reduced zinc content, five types of graphene modified zinc-rich epoxy coatings (G-ZRCs) were prepared. The effec...
Analysis of oxidation degree of graphite oxide and chemical structure of corresponding reduced graphite oxide by selecting different-sized original graphite
The thermal exfoliation and reduction of graphite oxide (GO) is the most commonly used strategy for large-scale preparation of graphene, and the oxidation degree of GO would influence the chemical… Expand
In situ preparation of Fe3O4 in a carbon hybrid of graphene nanoscrolls and carbon nanotubes as high performance anode material for lithium-ion batteries.
- Y. Liu, Ahmad Hassan Siddique, +5 authors Z. Liu
- Materials Science, Medicine
- 23 October 2017
A new conductive carbon hybrid combining both reduced graphene nanoscrolls and carbon nanotubes (rGNSs-CNTs) is prepared, and used to host Fe3O4 nanoparticles through an in situ synthesis method. As… Expand
Self-Assembly of CoPt Magnetic Nanoparticle Arrays and its Underlying Forces.
Nanoparticles covered with surfactants are often used to study particle motion patterns and self-assembly processes in solutions. Surfactants have influence on the interparticle interactions and… Expand
Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy
Abstract The friction and wear behavior of peak aged Cu–Cr–Zr alloys dry sliding against a brass counterface were investigated on a pin-on-disk wear tester. The microstructure of the aged Cu–Cr–Zr… Expand