Guang-li Liu

Learn More
Oxic-settling-anaerobic process (OSA) was known as a cost-effective way to reduce the excess sludge production with simple upgrade of conventional activated sludge process (CAS). A low oxidation-reduction potential (ORP) level was the key factor to sludge decay and lysis in the sludge holding tank of the OSA process. However, the ORP control with nitrogen(More)
The degradation characteristics and rule of hexachlorobenzen (HCB) in water were studied and the results were compared by the advanced oxidation process UV, O3 and UV/O3. The experimental results showed that UV itself did not contribute to the removal of HCB obviously and HCB could be quickly degraded by O3 and UV/O3, namely UV < O3 < UV/O3. But in the case(More)
AIM To observe the characteristics of vestibular-ocular reflex (VOR) of guinea pigs during eccentric sinusoidal rotation in different frequencies and radius, and compare them with that during axis rotation, obtain the parameters which reflect otolith functions, and provide experimental evidence for the establishment of otolith function test. METHODS(More)
By constructing a dual-chamber microbial fuel cell (MFC), experiments were carried out using an initial glucose concentration of 1 000 mg/L with different nitrobenzene (NB) concentrations (0, 50, 150 and 250 mg/L) as the MFC's fuel. Results showed that with an external resistance of 1 000 omega, the initial glucose concentration of 1 000 mg/L and the(More)
Microbial components of the microbial fuel cells (MFCs), including species constitution and metabolic mechanism of the anodic microorganisms, are critical to the optimization of electricity generation. An electrogenesis baterium strain (designated as RE7) was isolated from an MFC that had been running in a fed batch mode for over one year. The isolate was(More)
Cross-linked chitosan gel beads were used to adsorb perchlorate (ClO4-) from water. Batch experiments were conducted to investigate the effects of temperature, pH, and initial ClO4- concentration, adsorption isotherms and kinetics, and regeneration ability. The adsorption process of ClO4- on chitosan is exothermic reaction. The adsorption capacity varies(More)
This study compared the sludge reduction performance of a new oxic-settling-anaerobic (NOSA) process with that of a conventional adsorption-biodegradation process. A 50 m(3)/d pilot trial system with two different process configurations was operated for 6 months. The NOSA process functioned effectively in removing both chemical oxygen demand and nitrogen(More)
In order to improve H2 utilization efficiency and to reduce energy consumption during the hydrogenotrophic sulfate reduction process, a two-chambered microbial electrolysis system (MES) with a biocathode was constructed. The performance of MES in terms of sulfate removal and the electron utilization was studied. With an applied voltage of 0.8 V, biocathode(More)
Cross-linked quaternary chitosan salt was prepared and used to adsorb perchlorate from water. Parameters of cross-linking agent, temperature and pH were investigated to optimize the reaction conditions. The adsorption and regeneration ability of the adsorbent were also conducted. Quaternary chitosan salt could be fixed by cross-linking with glutaraldehyde(More)
The hydrodynamic characteristics in the oxidation ditch have great effects on the distributions of the dissolved oxygen and the velocity gradient, and then make important effects on the removal efficiency and energy consumption. The single-ditch Passver oxidation ditch with the capacity of 500 m3/d was investigated. The measurement and computer simulation(More)