• Publications
  • Influence
Thermal shock behaviour of α:β-SiAlON–TiN composites
Abstract α:β-SiAlON and 10, 17, and 25 wt% TiN particle reinforced composites were produced by a gas pressure sintering method. The densification behavior, phase and microstructural evolution,Expand
  • 19
Microstructural Characterization, Mechanical, Physical and Thermal Properties of a Diesel Particulate Filter
In the literature, limited studies are available due to the challenges of the detailed microstructural characterization and determination of properties of diesel particulate filters (DPFs). For thisExpand
  • 6
Production and characterization of a hybrid polymer matrix composite
The aim of this study was to develop low cost hybrid composites with enhanced mechanical properties by the addition of industrial wall tile and glass fiber wastes into epoxy resin. This process notExpand
  • 11
Induced superhydrophobic and antimicrobial character of zinc metal modified ceramic wall tile surfaces
Abstract Hydrophobic surfaces are also known to have antimicrobial effect by restricting the adherence of microorganisms. However, ceramic products are produced by high temperature processesExpand
  • 5
The effect of silicon nitride powder characteristics on SiAlON microstructures, densification and phase assemblage
Abstract The surface characteristics, particle size distribution and impurities of starting Si 3 N 4 powders exert a very significant influence on the microstructure of sintered silicon nitride basedExpand
  • 7
Epoxy Matrix Composites Containing Urea Formaldehyde Waste Particulate Filler
In the present study, industrial toilet seat wastes which contain 70 wt% urea formaldehyde and 30 wt% cellulose were used as a particulate reinforcement in epoxy matrix and their mechanical andExpand
  • 12
Wear response of glass fiber and ceramic tile-reinforced hybrid epoxy matrix composites
This study presents the tribological behavior of epoxy matrix composites containing two different fillers. The composites contain fillers with different particle sizes (< 90 µm and in the range ofExpand
  • 3
  • PDF
INFLUENCE OF VACUUM APPLICATION ON THE TRIBOLOGICAL PROPERTIES OF PORCELAIN WASTE REINFORCED EPOXY COMPOSITES
Bu calisma, vakum uygulamasinin atik porselen katkili epoksi matrisli kompozit malzemelerin mekanik ve tribolojik ozelliklerine etkisini degerlendirmektedir. Tribolojik karakterizasyon; tungstenExpand
  • 1
  • PDF
Porselen Atık Takviyeli Epoksi Kompozitlerinin Tribolojik Özelliklerine Vakum Uygulamasının Etkisi
Bu calisma, vakum uygulamasinin atik porselen katkili epoksi matrisli kompozit malzemelerin mekanik ve tribolojik ozelliklerine etkisini degerlendirmektedir. Tribolojik karakterizasyon; tungstenExpand
DEPENDENCE OF SiAlON-TiN COMPOSITE PROPERTIES ON TiN REINFORCEMENT PARTICLE SIZES
TiN particle size is an effective parameter on microstructure, mechanical and physical properties of SiAlON-TiN composites. In this study, the effect of TiN particle size (nano and micron level) onExpand