• Publications
  • Influence
Characterization of cellulose II nanoparticles regenerated from 1-butyl-3-methylimidazolium chloride.
Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC) and cotton using 1-butyl-3-methylimidazoliumExpand
  • 110
  • 15
Bamboo–Fiber Filled High Density Polyethylene Composites: Effect of Coupling Treatment and Nanoclay
High density polyethylene (HDPE)/bamboo composites with different nanoclay and maleated polyethylene (MAPE) contents were fabricated by melt compounding. The compounding characteristics, clayExpand
  • 119
  • 8
  • PDF
Upgrading of urea formaldehyde-bonded reed and wheat straw particleboards using silane coupling agents
Reed and wheat straw particleboards bonded with urea formaldehyde (UF) resin were manufactured from two different material configurations (i.e., fine and coarse particles). The board densities wereExpand
  • 94
  • 7
Comparative properties of cellulose nano-crystals from native and mercerized cotton fibers
Stable aqueous suspensions of cellulose nano-crystals (CNCs) were fabricated from both native and mercerized cotton fibers by sulfuric acid hydrolysis, followed by high-pressure homogenization.Expand
  • 129
  • 5
Characterization of cellulose I/II hybrid fibers isolated from energycane bagasse during the delignification process: Morphology, crystallinity and percentage estimation.
Cellulose I, cellulose II and cellulose I/II hybrid fibers were prepared from energycane bagasse using NaOH and NaClO2 treatments. The definitive defibrillation effect with an average width of 12±5μmExpand
  • 67
  • 3
Formation of the density profile and its effects on the properties of fiberboard
Two main types of fiberboards were produced using lauan (Shorea spp.) fibers with an isocyanate resin as the binder; fiberboard with a flat, homogeneous (homoprofile), and typical U-shapedExpand
  • 86
  • 3
Development of binderless particleboard from kenaf core using steam-injection pressing
Binderless particleboards were successfully developed from kenaf core using the steam-injection press. The effects of board density, steam pressure, and treatment time on the properties of the boardExpand
  • 62
  • 3
Development of high-performance UF-bonded reed and wheat straw medium-density fiberboard
Urea formaldehyde resin-bonded reed and wheat straw fiberboards were produced from the fibers made under different steam cooking conditions in refining processes at densities of 500 and 700kg/m3. TheExpand
  • 55
  • 3
Mechanical and physical properties of core–shell structured wood plastic composites: Effect of shells with hybrid mineral and wood fillers
Abstract The effects of shells filled with silane treated precipitated calcium carbonate (TPCC) and wood fiber (WF) on properties of core–shell structured wood plastic composites (WPCs) were studiedExpand
  • 40
  • 3
Effect of steam explosion treatment on characteristics of wheat straw.
Abstract Steam explosion treatments were used to modify straw fiber attributes for panel manufacturing. In particular, the effect of steam temperature and retention time on morphology, acidity,Expand
  • 96
  • 2