• Publications
  • Influence
DEFORMATIONS AND STRESSES IN ROTATING FGM PRESSURIZED THICK HOLLOW CYLINDER UNDER THERMAL LOAD
Using the infinitesimal theory of elasticity, closed form solutions for one-dimensional steady-state thermal stresses in a rotating functionally graded (FGM) pressurized thick-walled hollow circularExpand
  • 43
  • 3
On the free vibrations of grid-stiffened composite cylindrical shells
A unified analytical approach is applied for investigating the vibrational behavior of grid-stiffened composite cylindrical shells considering the flexural behavior of the ribs. A smeared method isExpand
  • 33
  • 2
The Effects of Helical Ribs’ Number and Grid Types on the Buckling of Thin-walled GFRP-stiffened Shells under Axial Loading
The results of an experimental study on the buckling behavior of thin-walled GFRP-stiffened cylindrical shells are presented. The buckling behavior of stiffened shells, with lozenge and triangularExpand
  • 36
  • 1
Thermo elastic analysis of a functionally graded cylinder under internal pressure using first order shear deformation theory
Thermo elastic analysis of a functionally graded cylinder under mechanical and thermal loads is investigated analytically in the present paper. The first order shear deformation theory (FSDT) isExpand
  • 31
  • 1
  • PDF
Numerical Simulation of Vacuum Drying by Luikov's Equations
A two-dimensional mathematical model was developed to simulate coupled heat and mass transfer in apple under vacuum drying. Luikov's equations are the governing equations in analyzing heat and massExpand
  • 15
  • 1
ELASTIC SOLUTION OF AXISYMMETRIC THICK TRUNCATED CONICAL SHELLS BASED ON FIRST-ORDER SHEAR DEFORMATION THEORY
M. Ghannad*, M. Zamani Nejad**, G. H. Rahimi*** *Mechanical Engineering Faculty, Shahrood University of Technology, Shahrood, Iran, E-mail: ghannad.mehdi@gmail.com **Mechanical EngineeringExpand
  • 31
  • 1
Application and analysis of functionally graded piezoelectrical rotating cylinder as mechanical sensor subjected to pressure and thermal loads
The exact thermoelastic analysis of a functionally graded piezoelectrical (FGP) rotating cylinder is investigated analytically. The cylinder is subjected to a combination of electrical, thermal, andExpand
  • 37
  • 1
The behavior of GFRP-stiffened and -unstiffened shells under cyclic axial loading and unloading
The results of an experimental study on the cyclic axial loading and unloading behaviors of thin-walled GFRP cylindrical shells are presented. Each specimen was tested first under pure axialExpand
  • 17
  • 1
Rheological and Mechanical Characterization of Multi-Walled Carbon Nanotubes/Polypropylene Nanocomposites
The rheology and morphology of multi-walled carbon nanotube (MWNT)/polypropylene (PP) nanocomposites prepared via melt blending was investigated. The minor phase content of MWNT varied between 0.25Expand
  • 33
Large deflection of flexible tapered functionally graded beam
In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied. In order to derive theExpand
  • 14