• Publications
  • Influence
Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques
Abstract Drilling is a metal removal process and is important for the final fabrication stage prior to application. This paper discusses the influence of cutting parameters on drillingExpand
Drilling of hybrid metal matrix composites : Workpiece surface integrity
Abstract The main concern in the present study is the surface roughness variations on the drilled surface and extension of surface and sub-surface deformation due to drilling. The influence ofExpand
Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite
In recent years, more attention is being paid to the structure of both the surface and the subsurface of a material being subjected to wear. Surface and subsurface deformation can cause aExpand
Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites
Aluminium metal matrix composites reinforced with SiC and graphite (Gr) particles was prepared by liquid metallurgy route. Dry sliding wear behaviour of the composite was tested and compared withExpand
Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites
The dry sliding wear behavior of Al 2219 alloy and Al 2219/SiCp/Gr hybrid composites are investigated under similar conditions. The composites are fabricated using the liquid metallurgy technique.Expand
The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems
The comparative performance of Glass-Epoxy (G-E) composite systems interfaced with graded fillers has been examined. In this study, composite materials were experimentally investigated under varyingExpand
Drilling of hybrid aluminium matrix composites
This paper presents the influence of cutting parameters on thrust force, surface finish, and burr formation in drilling Al2219/15SiCp and Al2219/15SiCp-3Gr composites. The composites were fabricatedExpand
Three-body abrasive wear behaviour of carbon and glass fiber reinforced epoxy composites
Abstract Three-body abrasive wear behaviour of carbon–epoxy (C–E) and glass–epoxy (G–E) composites has been investigated. The effect of abrading distance, viz., 270, 540, 810 and 1080 m and differentExpand
Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite
Abstract The mechanical and three-body abrasive wear behaviour of two- and three-dimensional E-glass woven fabric reinforced vinyl ester composites were studied in this article. The mechanicalExpand
Mechanical and tribological properties of glass–epoxy composites with and without graphite particulate filler
The objectives of this research article is to evaluate the mechanical and tribological properties of glass-fiber-reinforced epoxy (G–E) composites with and without graphite particulate filler. TheExpand
...
1
2
3
4
5
...