F. Luise

Publications39
h-index17
Citations913
Highly Influential Citations35
Claim Author Page
Author pages are created from data sourced from our academic publisher partnerships and public sources.

Recommended Authors

  • A. Tessarolo
  • 157 Publications, 1,500 Citations
  • G. Sulligoi
  • 163 Publications, 1,926 Citations
  • N. Bianchi
  • 430 Publications, 10,996 Citations
  • M. Mezzarobba
  • 31 Publications, 284 Citations
  • Publications
  • Influence
Potentials and limits of high-speed PM motors
This paper illustrates potentials and limits of high-speed permanent-magnet (PM) motors. The influence of materials chosen for PM, stator core, and retaining sleeve is highlighted. Slotted and… Expand
  • 194
  • 13
Regenerative Testing of a Concentrated-Winding Permanent-Magnet Synchronous Machine for Offshore Wind Generation—Part I: Test Concept and Analysis
Some high-torque electric machines, such as low-speed wind generators, may be very difficult to test on load because of the large and expensive mechanical equipment required to load them (motors) or… Expand
  • 33
  • 5
Regenerative Testing of a Concentrated-Winding Permanent-Magnet Synchronous Machine for Offshore Wind Generation—Part II: Test Implementation and Results
The on-load factory testing of high-power electric machines may be a challenge due to the large mechanical equipment required to drive or load them. In a companion paper, a regenerative full-load… Expand
  • 23
  • 5
Shipboard Power Generation: Design and Development of a Medium-Voltage dc Generation System
This article reports on the design, development, and validation of advanced prototype 2 MVA generation equipment [i.e., naval package (NP)] for a shipboard medium-voltage dc integrated power system… Expand
  • 51
  • 3
A finite element approach to harmonic core loss prediction in VSI-fed induction motor drives
When an induction motor is supplied by a PWM voltage source inverter (VSI), flux pulsations due to voltage harmonics cause extra power dissipation for hysteresis and eddy-currents in the magnetic… Expand
  • 12
  • 2
Analysis and design of a PM Brushless Motor for high-speed operations
TLDR
This paper deals with the design of a 1-kW permanent-magnet (PM) brushless motor operating in the speed range of 20-40 k r/min. Expand
  • 80
  • 1
Analysis and design of a brushless motor for high speed operation
This paper presents the design of a 1 kW permanent magnet brushless motor operating at 20-40 krpm. The design procedure involves parametrical research of the most convenient motor configuration… Expand
  • 22
  • 1
Potentials and limits of high speed PM motors
This paper illustrates the potentials and limits of high-speed permanent-magnet (PM) motors. The effect of the material choice, including PM, stator core and retaining sleeve is highlighted. Slotted… Expand
  • 38
  • 1
Use of Time-Harmonic Finite-Element Analysis to Compute Stator Winding Eddy-Current Losses Due to Rotor Motion in Surface Permanent-Magnet Machines
It is known from the literature that in electric machines with open stator slots, the air-gap flux partly enters the slot openings and induces eddy currents in the conductors placed closest to the… Expand
  • 34
  • 1
An Analytical-Numeric Method for Stator End-Coil Leakage Inductance Computation in Multi-Phase Electric Machines
  • A. Tessarolo, F. Luise
  • Engineering, Computer Science
  • IEEE Industry Applications Society Annual Meeting
  • 24 October 2008
TLDR
In this paper an analytical-numeric method for stator end-coil leakage inductance computation is presented based on the solution of Neumann integrals. Expand
  • 22
  • 1