We don’t have enough information about this author to calculate their statistics. If you think this is an error let us know.
Learn More
OBJECTIVES CrCoMo alloy specimens were successfully fabricated using selective laser melting (SLM). The aim of this study was to carefully investigate microstructure of the SLM specimens in order to understand the influence of their structural features inter-grown on different length scales ranging from nano- to macro-levels on their mechanical properties.(More)
Safe containment of radionuclides from spent nuclear fuel in geological disposal for hundred thousands of years, which may cover the period of glaciation, requires analysis of material behaviour of fuel containers under ice-age loads. The primary approach to prevent container failure is to determine critical defects and the elimination of such manufacturing(More)
The finite element analysis (FEA) of the stress distribution in the mono- and bicortically fixed implants subjected to 3-axial loading was performed and verified experimentally on a model mandible to evaluate the benefits of each type of fixation from the viewpoint of the compressive stress reduction in the cortical part of atrophied mandible. The analysis(More)
The work investigates the effect of compressive residual stresses generated in thin W-C based coatings during DC magnetron deposition process on nanohardness (HIT) and indentation modulus (EIT). It was discovered that the hardness values increase approximately linearly from 16.5 to 19.5 GPa with an increase of the compressive residual stresses from 1.5 to(More)
  • 1