Efim M Oks

We don’t have enough information about this author to calculate their statistics. If you think this is an error let us know.
Learn More
The paper presents the results of tests of a new compact two-stage bulk gas plasma gun. The plasma gun is based on a nonself-sustained gas discharge with an electron emitter based on a discharge with a self-heating hollow cathode. The operating characteristics of the plasma gun are investigated. The discharge system makes it possible to produce uniform and(More)
An ion source based on a two-stage discharge with electron injection from a cold emitter is presented. The first stage is the emitter itself, and the second stage provides acceleration of injected electrons for gas ionization and formation of ion flow (<20 eV, 5 A dc). The ion accelerating system is gridless; acceleration is accomplished by an electric(More)
Whereas energetic ion beams are conventionally produced by extracting ions (say, positive ions) from a plasma that is held at high (positive) potential, with ion energy determined by the potential drop through which the ions fall in the beam formation electrode system, in the device described here the plasma and its electronics are held at ground potential(More)
A boron ion source based on planar magnetron discharge with solid boron target has been developed. To obtain a sufficient conductivity of the boron target for high current discharge ignition, the target was heated to the temperature more than 350 °C. To reach this temperature, thermally isolated target was heated by low-current high-voltage magnetron DC(More)
We report on an experimental study of an ion source based on a Penning discharge with a cold hollow cathode in crossed electric and magnetic fields. The minimum vacuum chamber operating pressure was 3 × 10(-5) Torr for argon and 5 × 10(-5) Torr for hydrogen. The use of a hollow cathode allowed decreasing the discharge operating voltage down to 350 V at a(More)
The paper describes the design and principle of operation of an inverse time-of-flight spectrometer for research in the plasma produced by an electron beam in the forevacuum pressure range (5-20 Pa). In the spectrometer, the deflecting plates as well as the drift tube and the primary ion beam measuring system are at high potential with respect to ground.(More)
This article reports on design and application of wide-aperture pulsed beam source, based on hollow cathode discharge. The source is intended for electron beam generation in pressure range 2-15 Pa. Multi-aperture extraction system, used in a source, provided beam cross-section uniformity of 10% on diameter 40 mm. The limiting values of the current density,(More)
The Metal Vapor Vacuum Arc (MEVVA) ion sources are capable of generating ion beams of almost all metals of the periodic table. For this kind of ion source, a combination of gas feeding with magnetic field allows the simultaneous generation of both metal and gaseous ions. That makes the MEVVA ion source an excellent instrument for science and application.(More)
The results of an experimental study of low-energy (<200 eV) ion flux generation with space charge neutralization are presented. Argon was used as a working gas. The working gas pressure in the vacuum chamber was 2-4 x 10(-2) Pa. Ion beam was extracted from the hollow cathode of main discharge plasma by a single mesh extractor with subsequent deceleration(More)
For the past four years a joint research and development effort designed to develop steady state, intense ion sources has been in progress with the ultimate goal to develop ion sources and techniques that meet the two energy extreme range needs of meV and hundreads of eV ion implanters. This endeavor has already resulted in record steady state output(More)