Edward Muljadi

Learn More
Permanent-magnet generators have been used for wind turbines for many years. Many small wind turbine manufacturers use direct-drive permanent-magnet generators. For wind turbine generators, the design philosophy must cover the following characteristics: low cost; light weight; low speed; high torque; and variable speed generation. The generator is easy to(More)
– Most wind turbines are equipped with line-connected induction generators. Induction generators are very attractive as wind turbine generators due to their low cost, ruggedness, and the need for little or no maintenance. At constant frequency, the induction generator operates in a small range of speeds and, therefore, it operates with a small range of(More)
This paper reviews and describes a simplified model of a Doubly Fed Induction Generator (DFIG) based on the IEC 61400-27 devoted to ”Electrical simulation models for wind power generation”. This Standard is focused on defining generic simulation models for both wind turbines (Part 1) and wind farms (Part 2). A brief summary regarding the(More)
In a wind power plant (WPP) consisting of multiple wind generators (WGs), the wind speed of WGs at the downstream side decreases due to the wake effect, and thus their rotor speeds are smaller than those of the upstream WGs because of an MPPT operation. Therefore, WGs in a WPP have different amount of the kinetic energy stored in their rotating masses. This(More)
A variable-speed, constant-pitch wind turbine was investigated to evaluate the feasibility of constraining its rotor speed and power output without the benefit of active aerodynamic control devices. A strategy was postulated to control rotational speed by specifying the demanded generator torque. By controlling rotor speed in relation to wind speed, the(More)
We analyzed a power system network, which consisted of two types of power generation: wind turbine generation and diesel generation. The power quality and the interaction of diesel generation, the wind turbine, and the local load were the subjects of investigation. From an energy-production point of view, it is desirable to have as much wind energy(More)
Simulation models of a variable-speed, fixed-pitch wind turbine were investigated to evaluate the feasibility of constraining rotor speed and power output without the benefit of active aerodynamic control devices. A strategy was postulated to control rotational speed by specifying the demanded generator torque. By controlling rotor speed in relation to wind(More)