Daiichiro Yokoyama

  • Citations Per Year
Learn More
The purpose of this study was to determine the optimal condition for fabricating accurate crowns efficiently using an internet-based CAD/CAM system. The influences of three different CAD/CAM restorative materials (titanium, porcelain, and composite resin) and three different step-over scanning distances (0.01 mm, 0.11 mm, and 0.21 mm) were evaluated, and(More)
PURPOSE The purpose of this study was to investigate the differences between Rocatec (as surface treatment) and #600 polishing (as control) on shear bond strength of layering porcelain and hybrid composite to zirconium dioxide ceramics. METHODS Manufactured zirconia blocks used in this study were yttrium partially stabilized zirconia (YTZ(®)), and(More)
PURPOSE The aim of this study was to evaluate stress distribution in anterior adhesive fixed dental prostheses (FDP) and at the tooth/framework interface. Metal (M-FDP) and glass fiber-reinforced composite (FRC-FDP) frameworks were compared. MATERIALS AND METHODS The design of the FDP consisted of retainers on a maxillary central incisor and canine with a(More)
Using finite element analysis (FEA), this study investigated the effects of the mechanical properties of adhesive resin cements on stress distributions in fiber-reinforced resin composite (FRC) adhesive fixed partial dentures (AFPDs). Two adhesive resin cements were compared: Super-Bond C&B and Panavia Fluoro Cement. The AFPD consisted of a pontic to(More)
PURPOSE The aim of this study was to investigate the optimal design of a fiber-reinforced composite (FRC) framework to obtain the maximum reinforcement for fixed partial dentures (FPDs) under three different loading conditions using three-dimensional finite element (FE) analysis. materials and methods: A three-unit FPD replacing the maxillary right lateral(More)
The present study was designed to measure the durability of glass fiber-reinforced hybrid resins (FRC) in clinical applications. Accordingly, we studied the effects of static and dynamic loading as well as temperature changes inside the oral cavity, a moist environment, on the bending strength of FRC. The bending strength was measured using several tests,(More)
PURPOSE To investigate the influence of cyclic impact load and the number of load cycles on compressive shear bond strength under the three different cements. MATERIALS AND METHODS The following materials were used: Super Bond C&B (SB) and Panavia Fluoro Cement (PF) as adhesive resin cements, Fuji Luting (FL) as a resin-modified glass-ionomer cement, and(More)
A fiber-reinforced composite inlay-onlay FPD was used for a single posterior tooth replacement in a patient refusing implant for psychological reasons. The FRC-FPD was made of pre-impregnated E-glass fibers (everStick, StickTeck, Turku, Finland) embedded in a resin matrix (Stick Resin, StickTeck, Turku, Finland). The unidirectional glass fibers were used to(More)
The purpose of this study was to evaluate the stress distribution on the alveolar bone surrounding abutment teeth and the displacement of the Aramany Class IV obturator prosthesis with two different clasp designs. Three-dimensional finite element models of an Aramany Class IV maxillary defect were constructed. Two different clasp designs on an obturator(More)