• Publications
  • Influence
Microstructures and properties of Ni/TiC/La2O3 reinforced Al based composite coatings by laser cladding
Abstract Ni/TiC/La2O3 reinforced Al based composite coatings have been prepared by laser cladding technique on offshore steel. Microstructure of coatings was investigated with scanning electronExpand
  • 9
  • 1
Mechanical properties of hydroxyapatite-zirconia coatings prepared by magnetron sputtering
Abstract Hydroxyapatite (HA)-zirconium (ZrO 2 ) composite coating was produced by magnetic sputtering on Ti6Al4V titanium alloy substrate, the coatings of 50HA-50ZrO 2 and 75HA-25ZrO 2 (massExpand
  • 21
Effects of loads on friction–wear properties of HVOF sprayed NiCrBSi alloy coatings by laser remelting
Abstract A high velocity oxygen fuel (HVOF) sprayed NiCrBSi coatings on H13 hot work mould steel were processed using a laser remelting (LR). The surface–interface morphologies, chemical compositionsExpand
  • 27
Microstructures and Properties of Laser Cladding Al-TiC-CeO2 Composite Coatings
Al-TiC-CeO2 composite coatings have been prepared by using a laser cladding technique, and the microstructure and properties of the resulting composite coatings have been investigated using scanningExpand
  • 18
  • PDF
Effects of different shocked paths on fatigue property of 7050-T7451 aluminum alloy during two-sided laser shock processing
The tensile samples manufactured by 7050 aluminum (Al) alloy were treated by different shocked paths during two-sided laser shock processing (LSP), and the samples were divided into two groupsExpand
  • 39
Effects of TiC on the microstructure and properties of TiC/TiAl composite coating prepared by laser cladding
Abstract In order to study the effect of TiC on the microstructure and properties of cladding coatings, TiC/ TiAl composite coatings have been prepared by using a laser cladding technique on TiAlExpand
  • 25
Study on Residual Stress of 3A21 Metal Sheet by Laser Shock in Oblique Angle
3A21 metal sheet was shocked by Nd-glass laser in oblique angle under the function of pulse energy 42 J, pulse width 23 ns, pulse power 1.2×109 W, the angle between input beam and normal of sample isExpand
  • 1
Stress Corrosion of X80 Pipeline Steel Welded Joints by Slow Strain Test in NACE H2S Solutions
The X80 pipeline steel was welded with the way of submerged arc welding. The SST (slow strain test) of the welded joint samples in the air, NACE (National Association of Corrosion Engineers) solutionExpand
  • 21
Microstructure and corrosion behaviour of laser-cladding Al-Ni-TiC-CeO2 composite coatings on S355 offshore steel
Abstract Al-Ni-TiC-CeO 2 composite coatings were deposited on S355 offshore steels by laser cladding. The microstructure and corrosion behaviour features, such as immersion corrosion and corrosiveExpand
  • 25
Effects of Al and Ti additions on corrosive–wear and electrochemical behaviors of laser cladded FeSiB coatings
Abstract FeSiB, FeSiBAl and FeSiBTi coatings were fabricated on S355 steel using a laser cladding (LC). The surface and cross–section morphologies, chemical elements and phases of obtained coatingsExpand
  • 4
...
1
2
3
4
5
...