• Publications
  • Influence
Asymmetry between charge and discharge during high rate cycling in LiFePO4 – In Situ X-ray diffraction study
Abstract Asymmetric behavior of structural changes during charge and discharge of C-coated LiFePO4 has been investigated using synchrotron based in situ XRD. C-coated LiFePO4 undergoes phaseExpand
  • 67
  • 2
Fabrication of boron‐carbide/boron heterojunction devices
We have succeeded in the fabrication of a boron–carbide/boron diode on an aluminum substrate, and a boron–carbide/boron junction field effect transistor. Our results suggest that with respect to theExpand
  • 55
  • 2
Photocatalytic TiO2 deposition by chemical vapor deposition
Dip-coating, spray-coating or spin-coating methods for crystalline thin film deposition require post-annealing process at high temperature. Since chemical vapor deposition (CVD) process is capable ofExpand
  • 129
  • 1
Three-dimensional silicon/carbon core-shell electrode as an anode material for lithium-ion batteries
Abstract Practical application of silicon anodes for lithium-ion batteries has been mainly hindered because of their low electrical conductivity and large volume change (ca. 300%) occurring duringExpand
  • 76
  • 1
Cu-doped ZnO-based p–n hetero-junction light emitting diode
Copper-doped p-ZnO thin films (Cu:ZnO) were grown on α-Al2O3(0 0 0 1) and 6H:SiC(0 0 0 1) single crystal substrates by plasma-assisted molecular beam epitaxy. A p–n hetero-junction withExpand
  • 66
  • 1
Electrochemical characteristics of phosphorus doped silicon for the anode material of lithium secondary batteries
Abstract P-doped silicon nanowires (SiNWs) were directly grown from a silane, hydrogen and phosphine gas mixture on a stainless steel (316) substrate by the radio frequency Plasma Enhanced ChemicalExpand
  • 20
  • 1
Effect of aluminum fluoride coating on the electrochemical and thermal properties of 0.5Li2MnO3·0.5LiNi0.5Co0.2Mn0.3O2 composite material
The positive effect of AlF3 (Al–F) coating on the over-lithiated transition metal oxide with a composition of 0.5Li2MnO3·0.5LiNi0.5Co0.2Mn0.3O2 has been investigated to address its potential use inExpand
  • 55
  • 1
Photocatalytic TiO(2) deposition by chemical vapor deposition.
Dip-coating, spray-coating or spin-coating methods for crystalline thin film deposition require post-annealing process at high temperature. Since chemical vapor deposition (CVD) process is capable ofExpand
  • 14
  • 1
Plasma-Assisted Surface Modification on Electrode Interface for Flexible Fiber-Shaped Zn-Polyaniline Batteries.
A novel flexible fiber-shaped zinc-polyaniline battery (FZPB) is proposed to enhance the electrochemical performance, mass loading, and stability of polyaniline cathodes. To this end,Expand
  • 9
  • 1
Effect of the growth temperature on the properties of AlxGal−xN epilayers grown by HVPE
Abstract Growth of the Al x Ga 1− x N ternary alloy using AlCl 3 and GaCl gases on sapphire substrate by hydride vapor phase epitaxy (HVPE) is presented in this study. Al x Ga 1− x N epilayers wereExpand
  • 6
  • 1
...
1
2
3
4
5
...