• Publications
  • Influence
Drop Formation in a Circular Liquid Jet
Several recent developments in ink-jet printing have motivated numerous scientists to investigate the details of the breakup process of liquid jets emanating from nozzles. The entire January 1977Expand
Static Friction Coefficient Model for Metallic Rough Surfaces
Modele de calcul du coefficient de frottement statique dans le cas de surfaces rugueuses metalliques
Stress singularities at interface corners in bonded dissimilar isotropic elastic materials
Abstract The plane problem is considered of two materially dissimilar isotropic, homogeneous, elastic wedges that are bonded together along both of their common faces so that the cross section formsExpand
Slider Dynamics in the Lubricant-Contact Regime
  • S. Canchi, D. Bogy
  • Materials Science
  • IEEE Transactions on Magnetics
  • 17 February 2010
Thermal fly-height control sliders that are capable of subnanometer level actuation are used to investigate the vertical, down-track, and off-track slider dynamics in slider-disk lubricant contact.Expand
ON HEAT CONDUCTION AND WAVE PROPAGATION IN RIGID SOLIDS.
This paper is concerned with conduction of heat and the related problem of propagation of thermal waves in stationary rigid solids. Special attention is given to rate‐dependent response and theExpand
Numerical simulation of shock response of disk-suspension-slider air bearing systems in hard disk drives
Abstract As non-traditional applications of hard disk drives emerge, their mechanical robustness during the operating state is of greater concern. A procedure for simulating the shock responses of aExpand
Flying plasmonic lens in the near field for high-speed nanolithography.
The commercialization of nanoscale devices requires the development of high-throughput nanofabrication technologies that allow frequent design changes. Maskless nanolithography, includingExpand
...
1
2
3
4
5
...