Skip to search formSkip to main contentSkip to account menu
An SMS (single mode – multi mode – single mode) fiber structure for vibration sensing
We describe an SMS (single mode - multi mode - single mode) fiber structure to be used in a vibration sensing system. The fiber structure was fabricated by splicing a section (about 300 mm in length)…
View on IOP Publishing
Fiber optic load sensor using microbend-deformer
Monitoring volume in traffic load is necessary in order to manage the increase of traffic load volume. One of the technologies has been used in that case is Weigh-in-Motion (WIM). Conventional load…
View on IOP Publishing
Variable–structure repetitive control for discrete–time linear systems with multiple–period exogenous signals
TLDR
It is shown through an example that the repetitive control system constructed using the proposed control method can effectively track a sinusoidal reference signal despite the presence of a multiple-period disturbance.
View via Publisher
The effect of macro-bending on power confinement factor in single mode fibers
One of the methods to determine the macro-bending effect in a single mode fiber is by calculating its power loss coefficient. We describe an alternative method by using the equation of fractional…
View on IOP Publishing
Macro-bending Loss of Single-mode Fiber Beyond Its Operating Wavelength
A standard telecommunication-grade single-mode optical fiber is designed to have a low macro-bending loss in its entire operating wavelengths to comply with the ITU-T Recommendation G.652. In this…
View PDF
Structural and Morphological Characteristics of Plasma Sprayed Tio2-coatings
STRUCTURAL AND MORPHOLOGICAL CHARACTERISTICS OF PLASMA SPRAYED TiO 2 -COATINGS. TiO 2 thin layers have been deposited on glass substrates using Plasma Spray technique. The TiO 2 starting powders are…
View via Publisher
STRUCTURAL AND MORPHOLOGICAL CHARACTERISTICS OF PLASMA SPRAYED TiO 2 -COATINGS
STRUCTURAL AND MORPHOLOGICAL CHARACTERISTICS OF PLASMA SPRAYED TiO 2 -COATINGS. TiO 2 thin layers have been deposited on glass substrates using Plasma Spray technique. The TiO 2 starting powders are…
View via Publisher
Discrete-Time Design of Model Reference Learning Control System
TLDR
Simulation results indicate that the accurate tracking of aperiodic reference can be achieved as long as the plant and disturbance models are accurately known.
View on IEEE
Determination of the effective cut-off wavelength of several single-mode fiber patchcords
The effective cut-off wavelength is one of the important parameters in single-mode optical fiber. Nevertheless, the data sheet of an optical fiber patchcord generally does not specify the exact value…
View on IOP Publishing
Sliding Mode Repetitive Controller for a Plant with Time-Varying Sampling Times
TLDR
The SMRC basically integrates the features of Repetitive Control and Sliding Mode Control in order to get the advantages from both controllers and reaches convergency and small tracking error when the reference is periodic.
View on IEEE
...
...
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy, Terms of Service, and Dataset License