Learn More
An investigation of targeted biomolecules was accomplished by combining a micro-fluxgate-based bio-sensing system and Dynabeads. The fluxgate sensor for biomolecule detection was fabricated by Micro Electro-Mechanical system technology, including thick photoresist lithography, electroplating and chemical wet etching. The magnetic core of the sensor was made(More)
In this paper, based on the multiwire core design and microelectromechanical system technology, we report improved performance of a microsolenoid fluxgate sensor by integrating a bilayer core of co-based amorphous ribbon. By means of utilizing integrated multilayer core structure and high permeability amorphous ribbon core material, this paper shows how a(More)
This paper reports on a technological process that combines copper as conductor, permalloy as magnetic core material, and polyimide as insulation material to complete a microinductor on glass with high inductance. The shape of the magnetic core scheme was rectangular, of which the width of the long side and short side were 1.4 and 0.6 mm, respectively. The(More)
A giant magnetoimpedance (GMI)-based biosensor was developed for detection of Escherichia coli (E. coli) O157: H7. The GMI sensor involving the sensing elements of Cr/Cu/NiFe/Cu/NiFe was fabricated by Micro Electro-Mechanical system (MEMS) technology, including thick photoresist lithography and electroplating. A separate Au film substrate as immunoplatform(More)
A Dynabeads-labeled magnetic immunoassay (MIA) has been developed by using an integrated giant magnetoimpedance (GMI) biosensor for the detection of alpha-fetoprotein (AFP). The GMI biosensor (Cr/Cu/NiFe/Cu/NiFe/Al2O3/Cr/Au films) integrated magnetic sensing elements and a biomolecular immunoplatform. Au film was modified with 11-Mercaptoundecanoic acid(More)
This paper presents a contactless detection method for detecting prostate specific antigen with a giant magnetoresistance sensor. In contactless detection case, the prostate specific antigen sample preparation was separated from the sensor that prevented the sensor from being immersed in chemical solvents, and made the sensor implementing in immediately(More)
Soft FeSiBCuNbCr magnetic thin film was deposited by magnetron sputtering as magnetic core for inductor. In the fabrication process, UV-LIGA, dry etching technique, fine polishing and electroplating technique are adopted. The size of the solenoid-type inductor is 3.9 mm times 2.66 mm. Experimental results show that the inductance keeps constant about 0.9(More)
This paper reports a technological process that combines copper as conductor, NiFe film as magnetic core and polyimide as insulation material to complete a solenoid-type inductor. The results show that the inductance is 5.4 muH at 1 MHz and it keeps high inductance of 2 muH at 10 MHz. The quality factor is 1.54 at 1 MHz and up to 1.9 at 7 MHz
Hydrothermal reactions of lanthanide metal salts with MeN(CH(2)CO(2)H)(CH(2)PO(3)H(2)) (H(3)L) and 5-sulfoisophthalic acid monosodium salt (NaH(2)BTS) lead to four isomorphous lanthanide carboxylate-phosphonate-sulfonate hybrids, namely, Ln(H(2)L)(HBTS)(H(2)O)(2).H(2)O (Ln = La (1), Pr (2), Nd (3), Gd (4)). Their structures have been established by X-ray(More)