• Publications
  • Influence
Preparation and characterization of TiO2-regenerated cellulose inorganic–polymer hybrid membranes for dehydration of caprolactam
Abstract Novel membrane of inorganic–polymer hybrid membrane was prepared by incorporation of the nano-TiO 2 into regenerated cellulose (RC). The resulting membrane was characterized by AFM, SEM, andExpand
Synthesis and characterization of novel room temperature vulcanized (RTV) silicone rubbers using Vinyl-POSS derivatives as cross linking agents
Two kinds of novel POSS cross-linkers were firstly prepared via hydrosilylation of Vinyl-POSS and trimethoxysilane. And two types of novel polydimethylsiloxane (PDMS) polymer composites as RTVExpand
Amine-functionalized poly(ionic liquid) brushes for carbon dioxide adsorption
Abstract Amine-functionalized imidazolium-based poly(ionic liquid) brushes on titanate nanotubes are synthesized using a convenient “grafting through” technique. The carbon dioxide adsorptionExpand
Thermal behaviour and mechanical properties of novel RTV silicone rubbers using divinyl-hexa[(trimethoxysilyl)ethyl]-POSS as cross-linker
Divinyl-hexa[(trimethoxysilyl)ethyl]-POSS (DVPS) as an octavinyl-POSS derivative was first prepared. A series of novel polydimethylsiloxane (PDMS)/DVPS hybrid materials as room temperature vulcanizedExpand
Synthesis and characterization of novel room temperature vulcanized (RTV) silicone rubbers using octa[(trimethoxysilyl)ethyl]-POSS as cross-linker
A novel cross-linker octa[(trimethoxysilyl)ethyl]-POSS (OPS) based on a Vinyl-POSS derivative was firstly prepared via hydrosilylation chemistry. The novel POSS cross-linker was applied to hydroxylExpand
Effects of casting solvent on microstructrue and ionic conductivity of anhydrous sulfonated poly(ether ether ketone)-inoic liquid composite membranes
Abstract As the key component of polymer electrolyte membrane fuel cells, the membrane has significant effect on the performance of fuel cells. The commonly used approach for preparation of membraneExpand
Mechanical and dynamic mechanical properties of epoxy syntactic foams reinforced by short carbon fiber
Epoxy syntactic foams were prepared with diglycidyl ether of bisphenol-A (DGEBA) epoxy resin, 2.4.6-tri(dimethylaminomethyl)phenol (DMP-30), coupling treated microsphere and short carbon fiber. TheExpand
Improve the catalytic activity of α-Fe2O3 particles in decomposition of ammonium perchlorate by coating amorphous carbon on their surface
Sphere- and pod-like {alpha}-Fe{sub 2}O{sub 3} particles have been selectively synthesized using NH{sub 3}.H{sub 2}O and NaOH solution to adjust the pH value of the designed synthetic system,Expand
Direct preparation and formation mechanism of belt-like doped VO2(M) with rectangular cross sections by one-step hydrothermal route and their phase transition and optical switching properties
VO2(M) shows a reversible first-order metal–insulator transition to metallic rutile phase VO2(R) at 68 °C. The large-scale and low-cost synthesis of VO2(M) are challenge for materials scientists. InExpand
Synergistic effect between POSS and fumed silica on thermal stabilities and mechanical properties of room temperature vulcanized (RTV) silicone rubbers
Abstract In this paper, both divinyl-hexa[(trimethoxysilyl)ethyl]-POSS (DVPS) and fumed silica were firstly introduced into polydimethylsiloxane (PDMS) system using as the cross-linker and theExpand
...
1
2
3
4
5
...