• Publications
  • Influence
A generalized heat transfer correlation for Iouver fin geometry
A generalized heat transfer correlation for louver fin geometry is developed with the aid of a large data bank. This data bank consists of 91 samples of louvered fin heat exchangers with differentExpand
  • 386
  • 26
Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: Correlation
Abstract A correlation for fin-and-tube heat exchanger having plain fin geometry is proposed in this study. A total of 74 samples were used to develop the correlation. For practical considerations,Expand
  • 367
  • 19
Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins
Abstract In the present study, 15 samples of plate fin heat exchangers with different geometrical parameters, including the number of tube rows, fin spacing and fin thickness are tested and comparedExpand
  • 196
  • 14
Heat transfer and friction characteristics of typical wavy fin-and-tube heat exchangers
Extensive experiments on the heat transfer and pressure drop characteristics of typical wavy fin-and-tube heat exchangers were carried out. In the present study, 18 samples of wavy fin-and-tube heatExpand
  • 185
  • 12
Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part I: new experimental data
Abstract This study presents the airside performance of fin-and-tube heat exchangers with plain fin configurations. A total of 18 samples were tested. The effect of the number of tube rows, fin pitchExpand
  • 226
  • 11
Heat and mass transfer for plate fin-and-tube heat exchangers, with and without hydrophilic coating
Abstract Heat and mass transfer characteristics of fin-and-tube heat exchangers with and without hydrophilic coating were reported in this study. The test exchangers consisted of three differentExpand
  • 110
  • 8
Empirical correlations for heat transfer and flow friction characteristics of herringbone wavy fin-and-tube heat exchangers
This study presents an empirical correlation describing the airside performance of herringbone wavy fin pattern. A total of 61 samples containing approximately 570 data points are used in theExpand
  • 111
  • 8
Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method
Abstract The enhancement of the thermal conductivity of water in the presence of copper (Cu) using the chemical reduction method is presented in this study. It is the first time that the chemicalExpand
  • 328
  • 7
Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers
Abstract General heat transfer and friction correlations for louver fin geometry having round tube configuration were proposed in the present study. A total of 49 samples of louvered fin-and-tubeExpand
  • 241
  • 7
...
1
2
3
4
5
...