• Publications
  • Influence
A novel hybrid supercapacitor with a carbon nanotube cathode and an iron oxide/carbon nanotube composite anode
A scalable spray deposition technique has been adopted to the fabrication of a flexible nanostructured hybrid supercapacitor based on thin film multi-walled carbon nanotube (MWNT) cathodes andExpand
  • 216
  • 1
  • PDF
Stress and microstructure of diamond-like carbon from ion-beam decomposition of hydrocarbon precursors
Abstract Films of amorphous carbon have been produced by ion-beam decomposition of polyphenyl ether and pentaphenyl trisiloxane. The composition of the films has been elucidated using RutherfordExpand
  • 13
  • 1
Surface studies of hydroxylated multi-wall carbon nanotubes
Abstract CVD grown MWCNTs, of typical diameter 5 to 50 nm and with approximately 15–20 concentric graphene layers in the multi-walls, have been surface functionalised using the Fenton hydroxylationExpand
  • 55
  • 1
Nanomechanical characterization of Sn–Ag–Cu/Cu joints—Part 2: Nanoindentation creep and its relationship with uniaxial creep as a function of temperature
Abstract In the first part of this study we reported the use of nanoindentation to evaluate the mechanical properties of microphases formed within Sn–Ag–Cu-based solder joints as a function ofExpand
  • 40
  • 1
High—temperature Sensors Based on SiC and Diamond Technology
  • 25
  • 1
The effect of metallization on the ohmic contact resistivity to heavily B-doped polycrystalline diamond films
Three metallization schemes, namely Al/Si, Ti-Au and TiWN-Au contacts on B-doped polycrystalline diamond films have been compared. After annealing at 450/spl deg/C in nitrogen Al/Si contacts show theExpand
  • 25
  • 1
Piezoresistive effect of boron-doped diamond thin films
Abstract Double-layer structures consisting of a nominally undoped diamond film and an overlying boron-doped diamond film on Si substrates were used for investigations into the piezoresistive effectExpand
  • 50
  • 1
High temperature instruments and methods developed for supercritical geothermal reservoir characterisation and exploitation—The HiTI project
During the early years of the Iceland Deep Drilling Project (IDDP), development of three distinctive technological and scientific approaches were formalised and then carried out until 2010 within aExpand
  • 24
  • 1
  • PDF
The effect of inhomogeneities in particle distribution on the dielectric properties of composite films
A practical approach for the modelling of the dielectric constants of thin composite films is presented. A general distribution function for composition fluctuations in the thin composite films isExpand
  • 29
  • 1
Automotive Engineering : Lightweight, Functional, and Novel Materials
PREFACE INDUSTRIAL PERSPECTIVE Introduction Future Vehicles and Materials Technologies Kimihiro Shibata Automobile Aluminium Sheet Takashi Inaba Plastic Technology for Automotive Modules Kazuhisa TohExpand
  • 45
  • 1
...
1
2
3
4
5
...