• Publications
  • Influence
Suspension HVOF Spraying of Reduced Temperature Solid Oxide Fuel Cell Electrolytes
Metal-supported solid oxide fuel cells (SOFCs) composed of a Ce0.8Sm0.2O2−δ (SDC) electrolyte layer and Ni-Ce0.8Sm0.2O2−δ (Ni-SDC) cermet anode were fabricated by suspension thermal spraying onExpand
Metal-supported solid oxide fuel cell operated at 400–600 °C
Abstract A metal-supported SOFC with a samarium doped ceria (SDC)/scandia-stabilized zirconia (ScSZ) bilayer electrolyte was fabricated by a combination of pulsed laser deposition (PLD) and wetExpand
Sm0.5Sr0.5CoO3 + Sm0.2Ce0.8O1.9 composite cathode for cermet supported thin Sm0.2Ce0.8O1.9 electrolyte SOFC operating below 600 °C
Abstract The cathode is a key component in low temperature solid oxide fuel cells. In this study, composite cathode, 75 wt.% Sm0.5Sr0.5CoO3 (SSC) + 25 wt.% Sm0.2Ce0.8O1.9 (SDC), was applied on theExpand
Orthogonal cutting mechanics of maple: modeling a solid wood-cutting process
The experimental results of orthogonal cutting of maple and the modeling of the cutting mechanics are presented. The tool cutting forces were measured for different feed rates. A set of equationsExpand
A brief review of the ionic conductivity enhancement for selected oxide electrolytes
The advantages of lowering the operation temperature of SOFCs have attracted great interest worldwide. One of the major barriers to decreasing the operation temperature is the ohmic loss of theExpand
A study on sintering aids for Sm0.2Ce0.8O1.9 electrolyte
Abstract In this study, an addition of Co oxide or Cu oxide to Sm0.2Ce0.8O1.9 (SDC) was studied to improve the sinterability of SDC. It has been found that both Co and Cu oxide are very effective asExpand
Low temperature solid oxide fuel cells with pulsed laser deposited bi-layer electrolyte
Abstract Solid oxide fuel cells (SOFC) using a pulsed laser deposited bi-layer electrolyte have been successfully fabricated and have shown very good performance at low operating temperatures. TheExpand
High performance metal-supported solid oxide fuel cells fabricated by thermal spray
Abstract Metal-supported solid oxide fuel cells (SOFCs) have been fabricated and characterized in this work. The cells consist of porous NiO–SDC as anode, thin SDC as electrolyte, and SSCo as cathodeExpand
Dynamic evaluation of low-temperature metal-supported solid oxide fuel cell oriented to auxiliary power units
Abstract A metal-supported solid oxide fuel cell (SOFC) composed of a Ni–Ce0.8Sm0.2O2−δ (Ni–SDC) cermet anode and an SDC electrolyte was fabricated by suspension plasma spraying on a Hastelloy XExpand
Ba1−xPrxCo1−yFeyO3−δ as cathode materials for low temperature solid oxide fuel cells
Abstract Ba 1− x Pr x Co 1− y Fe y O 3− δ (BPCF) perovskite oxides have been synthesized and investigated as cathode materials for low temperature solid oxide fuel cells (LT-SOFCs). Compared withExpand
...
1
2
3
4
...