C. Çelik

Publications28
h-index18
Citations795
Highly Influential Citations15
Claim Author Page
Author pages are created from data sourced from our academic publisher partnerships and public sources.

Recommended Authors

  • P. Promvonge
  • 151 Publications • 6,517 Citations
  • Kenan Yakut
  • 21 Publications • 512 Citations
  • M. Pigeon
  • 147 Publications • 4,385 Citations
  • B. Sahin
  • 94 Publications • 2,097 Citations
  • Publications
  • Influence
Determination of the optimum conditions for ion nitriding of AISI 5140 steel
Abstract AISI 5140 low alloy steel was ion nitrided under different process parameters including time (1, 4, 8 and 12 h), temperature (400, 450, 500 and 550 °C) and gas mixture ratio (0.05, 0.33, 1… Expand
  • 49
  • 3
Determination of the optimum conditions in the removal of Bomaplex Red CR-L dye from the textile wastewater using O3, H2O2, HCO3- and PAC.
Bomaplex Red CR-L textile dye was used in the experimental studies. Taguchi method was applied to determine optimum conditions in the removal of dye from synthetic textile wastewater. After the… Expand
  • 35
  • 2
A Taguchi approach for investigation of heat transfer from a surface equipped with rectangular blocks
Abstract The present work submits an investigation about the effect of the geometric position of wall mounted rectangular blocks on the heat transfer from the surface, taking into account the angular… Expand
  • 56
  • 2
Determination of the optimum conditions for tire rubber in asphalt concrete
Abstract The Taguchi method was used to determine optimum conditions for tire rubber in asphalt concrete with Marshall Test. The tire rubber in asphalt concrete was explored under different… Expand
  • 82
  • 1
A Taguchi approach for investigation of some physical properties of concrete produced from mineral admixtures
Abstract Durability of concrete structures is often liked to the presence (or not) of deleterious chemical species in the environment. Sulfate or acid-bearing environment originating, for instance,… Expand
  • 62
  • 1
Optimisation of the chlorination of gold in decopperized anode slime in aqueous medium
Abstract A study is conducted to determine optimum conditions for the chlorination of gold in decopperized anode slime with chlorine gas in aqueous medium by the Taguchi experimental design method.… Expand
  • 32
  • 1
Determination by the taguchi method of optimum conditions for mechanical properties of high strength concrete with admixtures of silica fume and blast furnace slag
The deterioration of concrete structures is a major problem in many countries throughout the world. This has prompted the search for methods of predicting the service life of both existing and new… Expand
  • 27
  • 1
Optimization Study and Damage Evaluation in Concrete Mixtures Exposed to Slow Freeze–Thaw Cycles
This paper presents an application of an optimization based on the Taguchi method for analyzing the deterioration of concrete with different compositions due to freezing and thawing. Effects of four… Expand
  • 9
  • 1
Investigation on the Removal of COD from Colored Aqueous Solutions with O3, H2O2, HCO3−, and PAC
In this study, chemical oxygen demand (COD) was removed using different processes containing O3, H2O2, HCO3−, and powder activated carbon (PAC) from the synthetic dye solutions. The effects of the… Expand
  • 3
  • 1
Determination of the optimum conditions for de-icing salt scaling resistance of concrete by visual examination and surface scaling
Abstract One of the main objectives of this work is to determine the most important parameter that affects the scaling resistance of concrete. Another objective is to investigate combined effects of… Expand
  • 24
  • 1
...
1
2
3
...