Bo-Hun Choi

Learn More
Fig. 5. Plot of the output voltage for two parallel SSCM's during a transient from 100 to 150 kW and from 150 to 100 kW (10 V/div and 0.1 s/div). speed of the algorithm significantly. Therefore, the card was not used for the main control algorithm, but was used to set the converter switching frequency, monitor-sensored voltages and currents, and establish(More)
Our amplifier using an all optical method and a fixed GFF achieved automatic gain flatness through all C-band without any NF degradation, and simultaneously a constant 25 dB gain, while input signals were varied between one channel and forty WDM channels.
  • 1